User's Manual

ManualsBrandsWilson Electronics ManualsElectronicsDUAL-BAND BI-DIRECTIONAL CELLULAR AMPLIFIER

Signal Booster

Installation

Guide

Contents

Before Getting Started ............................1

Accessories and Antenna Options . . . . . . . . . . . . . . . . . . 1

Quick Installation Overview ........................2

Installation Diagram ..............................2

Installing a Wilson Electronics External Adapter ........3

Installing Outside Antenna .........................3

Installing the Signal Booster . . . . . . . . . . . . . . . . . . . . . . . 3

Powering Up a Wilson Electronics Signal Booster . . . . . . 4

Installing Mounting Plate on DataPro Signal Booster . . . . 4

Warnings and Recommendations ...................5

Guarantee and Warranty ..................Back Cover

Signal Booster Specifications . . . . . . . . . . . . . .Back Cover

DataPro

™

Dual-Band

Signal Booster

Note: This manual contains important safety and operating information.

Please read and follow the instructions in this manual. Failure to do so could

be hazardous and result in damage to your signal booster.

Summary of content (8 pages)

PAGE 1
Signal Booster Installation Guide DataPro™ Dual-Band Signal Booster Contents Before Getting Started. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Accessories and Antenna Options . . . . . . . . . . . . . . . . . . 1 Quick Installation Overview. . . . . . . . . . . . . . . . . . . . . . . . 2 Installation Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 2
Installation Instructions for the Following Wilson Electronics Signal Boosters: DataPro: FCC ID: PWO2B1225 IC: 4726A-2B1225 Model: 2B1225 The term “IC” before the radio certification number only signifies that Industry Canada technical specifications were met. Before Getting Started This guide will help you properly install your Wilson Electronics Signal Booster. It is important to read through all of the installation steps for your particular application prior to installing any equipment.
PAGE 3
Quick Installation Overview The following steps provide a summary of the signal booster/antenna installation process. Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660. 1. Select a location to install the signal booster that is away from excessive heat, direct sunlight, moisture and that has proper ventilation. Do not place the signal booster in an air-tight enclosure. 2. Select a location on the top of the structure to install the outside antenna.
PAGE 4
How it Works Wilson Electronics signal boosters are bi-directional devices that deliver service levels consistent with what would be expected in areas of high cell network coverage. They amplify a weak or shadowed signal in mobile, marine and in-building applications. When using a Wilson Electronics signal booster in conjunction with Wilson Electronics antennas, the outside antenna will collect the cell tower signal and send it through the cable to the signal booster.
PAGE 5
Powering up a Wilson Electronics Signal Booster 1. Ensure that both the outside antenna coax cable and the adapter coax cable are connected to the signal booster before powering up the signal booster. 2. Connect the power supply to the power input labeled with the USB symbol on the signal booster. Plug the power supply into a wall outlet. 3. The indicator light on the top of the signal booster will be GREEN when the unit is powered up and working properly. 4.
PAGE 6
Mobile Installation In-Building Installation Outside Antenna (Point towards cell tower) Outside Antenna Connect to cell phone or data card DC Power Supply Lightning Surge Protector Signal Booster Power Supply Connect to cell phone or data card AC Surge Protector Signal Booster This is the recommended install for in-vehicle use. Contact our Technical Support Team for more information at: 866-294-1660 or tech@ wilsonelectronics.com This is the recommended install for in-building use.
PAGE 7
About Wilson Electronics Wilson Electronics, Inc. has been a leader in the wireless communications industry for over 40 years. The company designs and manufactures signal boosters, antennas and related components that significantly improve cellular telephone signal reception and transmission in a wide variety of applications, mobile, in-building, and M2M.
PAGE 8
20 dB Bandwidth (nominal) 1900 MHz -5.2 dBm -8.8 dBm -11.3 dBm -13.2 dBm -14.8 dBm 800 MHz -10.9 dBm -14.4 dBm -16.9 dBm -18.9 dBm -20.5 dBm 5V DC, 1A Power Requirements Notes: 1. Nominal gain is the maximum gain at any frequency in the passband. 2. Nominal bandwidth is the difference between two frequencies that are adjacent to the passband where the amplification is 20 dB lower than the passband amplification. One of the frequencies is lower than the passband and the other is higher. 3.