User's Manual

ManualsBrandsWilson Electronics ManualsElectronicsDUAL BAND BI-DIRECTIONAL BOOSTER AMPLIFIER

Amplifier

Installation

ide

stallatio

stallat

SIGNALBOOST

™

MobilePro

™

Dual-Band Wireless

Cellular / PCS Ampliﬁ er

with Built-in Antenna

Contents:

Guarantee and Warranty · · · · · · · · · · · · · · · · · · · · · · · 1

How it Works · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 2

Install Diagrams - Vehicle · · · · · · · · · · · · · · · · · · · · · · 3

Install Diagrams - In-Building · · · · · · · · · · · · · · · · · · · · 4

Vehicle Installation - Antenna · · · · · · · · · · · · · · · · · · · 5

Vehicle Installation · · · · · · · · · · · · · · · · · · · · · · · · · · · 6

In-Building Installation · · · · · · · · · · · · · · · · · · · · · · · · · 7

Powering Up a Wilson Ampliﬁ er · · · · · · · · · · · · · · · · · · 8

Understanding the Ampliﬁ er Lights · · · · · · · · · · · · · · · 8

Warnings and Recommendations · · · · · · · · · · · · · · · · 9

About Wilson Electronics · · · · · · · · · · · · · · · · · · · · · · 10

Ampliﬁ er Speciﬁ cations · · · · · · · · · · · · · · · · Back Cover

Wilson

Electronics, Inc.

Warning: This manual contains

important safety and operating information.

Please read and follow the instructions

in this manual. Failure to do so could be

hazardous and result in damage to your

ampliﬁ er.

Summary of content (12 pages)

PAGE 1
Amplifier Installation stallat stallatio Guide SIGNALBOOST™ MobilePro™ Dual-Band Wireless Cellular / PCS Amplifier with Built-in Antenna Contents: Guarantee and Warranty · · · · · · · · · · · · · · · · · · · · · · · 1 How it Works · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 2 Install Diagrams - Vehicle · · · · · · · · · · · · · · · · · · · · · · 3 Install Diagrams - In-Building · · · · · · · · · · · · · · · · · · · · 4 Vehicle Installation - Antenna · · · · · · · · · · · · · · · · · ·
PAGE 2
30-Day Money-Back Guarantee All Wilson Electronics products are protected by Wilson’s 30-day money-back guarantee. If, for any reason, the performance of any product is not acceptable, simply return the product directly to the reseller with a dated proof of purchase. 1-Year Warranty Wilson Electronics amplifiers are warranted for one (1) year against defects in workmanship and / or materials. Warranty cases may be resolved by returning the product directly to the reseller with a dated proof of purchase.
PAGE 3
Installation Instructions for the Following Wilson Amplifier: SIGNALBOOST™ MobilePro™ Dual-Band Wireless Amplifier Part # 801240 Model # 271220 FCC ID: PWO271220SA IC: 4726A-271220SA The term “IC” before the radio certification number only signifies that Industry Canada technical specifications were met.
PAGE 4
Before Getting Started This guide will help you properly install Wilson’s SIGNALBOOST™ MobilePro™ Dual-Band Wireless Cellular/PCS Amplifier. It is important to read through all of the installation steps for your particular application prior to installing any equipment. Read through the instructions, visualize where all the equipment will need to be installed and do a soft installation before mounting any equipment.
PAGE 5
An in-building accessory kit is available from Wilson Electronics. It includes the window bracket antenna mount, and AC adapter, and a convenient travel case. Installation Diagram - In-Building MobilePro™ Amplifier Outside O Antenna An (mounted (m on window) AC power supply Laptop USB Port USB Power Cable In-Building Installation ! Warning: The outside antenna must have a separation of at least 8 inches from all persons during normal operation.
PAGE 6
Installing a Wilson Outside Antenna on a Vehicle To receive the best cell signal, select a location in the center of the vehicle’s roof 12 inches away from any other antennas and free of obstructions. Follow the specific antenna installation instructions included with the outside antenna (sold separately except for certain kits). The outside antenna must be installed vertically. Signal performance will be degraded if the antenna is not vertical.
PAGE 7
Installing a Wilson MobilePro™ Amplifier in a Vehicle The Wilson MobilePro™ Amplifier is designed for installation on the dashboard of your vehicle, using the supplied adhesive bracket. Attach the bracket in a suitable location to the right of the steering wheel. NOTE: Be sure to select a location for the amplifier that does not inhibit your ability to operate the vehicle safely.
PAGE 8
Installing a Wilson Outside Antenna in a Building Follow the specific antenna instructions included with the outside antenna (sold separately except for certain kits). These instructions assume that you are using a Wilson magnet-mount or mini magnet-mount antenna and the optional suction-cup window bracket. To receive the best signal, select a window on the side of your building where your outside signal is the strongest.
PAGE 9
Powering up the Wilson MobilePro™ Amplifier In a Vehicle NT E NN A A Make sure the outside antenna cable is connected before powering up the amplifier. Carefully insert the USB power cable. Connect the mini-USB plug on the power cable to the amplifier port marked by the USB symbol. Connect the other end of the power cable to the USB port on the cigarette lighter adapter and insert the adapter into the cigarette lighter outlet of your vehicle.
PAGE 10
Warnings and Recommendations Warning: Do not plug the amplifier directly into the cell phone or cellular data card using an antenna adapter. It will damage the cell phone or cellular data card. Warning: Do not plug in the DC power supply until the outside antenna cable is attached to the amplifier.
PAGE 11
About Wilson Electronics Wilson Electronics, Inc. has been a leader in the wireless communications industry for nearly 40 years. The company designs and manufactures amplifiers, antennas and related components that significantly improve cellular telephone signal reception and transmission in a wide variety of applications, both mobile and in-building.
PAGE 12
Amplifier Specifications Dual Band 800/1900 MHz Specifications 271220/801240 SMA Female 50 ohms 5.2 X 2.7 X 1.2 inch or 13.2 X 6.9 X 3.