User's Manual



ModelNo.:WL605‐A‐2

ProductName：Controlbox

Manufacturer:WillisElectricCo.,Ltd.

Rating:120V60Hz1.8A



CONTROLBOXINSTRUCTIONS

Rotatetheknobonthecontrolboxtodeterminethefunctionselected.

Differentchoicesoflightpatternsforselection:

Function1:Combination

Function2:Inwaves

Function3:Sequential

Function4:Slo‐glo

Function5:Chasing/flash

Function6:Slowfade

Function7:Twinkle/flash

Function8:Steadyon



ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,

pursuanttopart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotection

againstharmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates,usesandcan

radiateradiofrequencyenergy

and,ifnotinstalledandusedinaccordancewiththeinstructions,

maycauseharmfulinterferencetoradiocommunications.However,thereisnoguaranteethat

interferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoescauseharmful

interferencetoradioortelevisionreception,whichcanbedeterminedbyturning

theequipment

offandon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthe

followingmeasures:

‧Reorientorrelocatethereceivingantenna.

‧Increasetheseparationbetweentheequipmentandreceiver.

PAGE 1
Model No.: WL605‐A‐2 Product Name：Control box Manufacturer: Willis Electric Co., Ltd. Rating: 120V 60Hz 1.8A CONTROL BOX INSTRUCTIONS Rotate the knob on the control box to determine the function selected.
PAGE 2
‧ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‧ Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules.