Digi-Wave™ 3.0 DLT 300 3.0 Digital Transceiver and DLR 360 3.0 Digital Receiver USER MANUAL New Pics on their way DLT 300 3.0 DLR 360 3.
DLT 300 3.0 Digital Transceiver and DLR 360 3.0 Digital Receiver Digi-Wave™ 3.0 DLT 300 3.0 Digital Transceiver and DLR 360 3.0 Digital Receiver Contents Digi-Wave™ 3.0....................................................................................................................................................................... 2 DLT 300 3.0 Digital Transceiver and DLR 360 3.0 Digital Receiver .................................................................................... 2 System Overview......
DLT 300 3.0 Digital Transceiver and DLR 360 3.0 Digital Receiver Troubleshooting...................................................................................................................................................................... 28 FAQs...................................................................................................................................................................................... 29 FCC statements.........................................................
DLT 300 3.0 Digital Transceiver and DLR 360 3.0 Digital Receiver System Overview The Digi-wave™ system is a patented, digital spread-spectrum (DSS), simultaneous two-way wireless listening system operating in the 2.4 GHz band. Due to it’s frequency-hopping algorithm, it avoids interference and is a very secure method of communication.
DLT 300 3.0 Digital Transceiver and DLR 360 3.0 Digital Receiver DLT 300 3.0 Controls and Connectors INTERNAL SPEAKER LCD DISPLAY LED INDICATORS TALK BUTTON VOLUME / SELECT UP VOLUME / SELECT DOWN POWER / MENU HEADPHONE JACK 3.5 MM MIC JACK 3.5 MM INTERNAL MICROPHONE 30-PIN CONNECTOR DLT 300 3.
DLT 300 3.0 Digital Transceiver and DLR 360 3.0 Digital Receiver QUICK GROUP CHANGE / SETUP BUTTONS ·· Press and hold and together for 3 seconds to enter or exit setup menu ·· Press and hold button for 3 seconds to enter quick group change mode. The GRP light will flash. Then use or to change groups. To exit, push again or just wait until the unit times out.
POWER DLT 300 3.0 Digital Transceiver and DLR 360 3.0 Digital Receiver 30-PIN DOCKING/ CHARGING CONNECTOR DLR 360 3.0 Controls and Connectors HEADPHONE JACK LANYARD SLOT SPEAKER STRENGTH DLT#1 STRENGTH DLT#2 ANTENNA SYMBOL NUMERIC TYPE BATTERY STRENGTH NUMERIC DISPLAY RED LED GREEN LED VOLUME ADJUST CH/GROUP CHANGE POWER 30-PIN DOCKING/ CHARGING CONNECTOR BATTERY TYPE SWITCH BATTERY COMPARTMENT SPEAKER DLR 360 3.0 Operation 1. Insert 2 AAA batteries into the DLR. Observe correct polarity.
DLT 300 3.0 Digital Transceiver and DLR 360 3.0 Digital Receiver Getting Started: Preprogrammed Systems If a system has been purchased, you will not need to perform any programming. The system will have been configured to your order. Turn Master 1 on first so other units can pair. Guest units will turn off after 5 minutes if they cannot find a master. 4. Charge all DLTs. If using DLRs, either charge them with NiMH batteries or insert fresh Alkaline batteries.
DLT 300 3.0 Digital Transceiver and DLR 360 3.0 Digital Receiver Before Programming the Digi-Wave™ System Depending upon the mode chosen, up to six people can talk in a group at any given time. The M1 will have first priority, M2 has second priority and Guest units have third priority. The M1 or M2 will have to turn off their TALK button to allow the Guest units to talk. When two or more people are talking in a group, the participants can hear their voices with the DLTs or DLRs.
DLT 300 3.0 Digital Transceiver and DLR 360 3.0 Digital Receiver Rules of Operation (1-way modes) The following rules must be followed when setting up any Digi-Wave™ system. Failure to adhere to these rules will result in unpredictable, unsupported operation. • Up to 15 channels can be used simultaneously, i.e. one floor and 14 interpreters. • There must be one Master 1 (usually this is also the floor), and only one, per group. • Each Interpreter must be assigned their own channel number.
DLT 300 3.0 Digital Transceiver and DLR 360 3.0 Digital Receiver Programming the Digi-Wave™ System for 1-way Modes There are 4 basic steps to programming a Digi-wave system: 1. Set Mode: 2-way or 1-way 2. Set Priority: Master 1, Master 2, and Guest 3. Set Address 4. Set Group Number Most of the programming is done on the DLT(s); the receivers just need to be assigned the correct group number. The Master 1 should be programmed first - all other units synchronize with the Master 1. Step 1.
DLT 300 3.0 Digital Transceiver and DLR 360 3.0 Digital Receiver Programming the Digi-Wave™ System for 2-way Modes There are 4 basic steps to programming a Digi-wave system: 1. Set Mode: 2-way or 1-way 2. Set Priority: Master 1, Master 2, and Guest 3. Set Address 4. Set Group Number Most of the programming is done on the DLT(s); the receivers just need to be assigned the correct group number. The Master 1 should be programmed first - all other units sychronize with the Master 1. Step 1.
DLT 300 3.0 Digital Transceiver and DLR 360 3.0 Digital Receiver Programming the Digi-Wave™ System: DLT Optional Settings Secure Key Code: When a group has been set up and the same Secure Code has been entered into all the DLTs, the DLTs without this Secure Original (save) Code entered cannot listen in on the group. This may be desirable in private or high security-level functions. The same four digit code must be programmed into all of the DLTs, Master 1, Master 2 and Guests.
DLT 300 3.0 Digital Transceiver and DLR 360 3.0 Digital Receiver Address Confirmation Original (save) Press the MENU button twice for the M1 and M2, once for GSTs. The address for the DLT will be displayed for two seconds. NOTE: Every DLT MUST have its own address and all must be assigned to the same group. Original (save) Quick Group Change “Groups” apply to 2-way Mode only. Secure Key Code fig. 1 Secure Key Code fig. 2 SLOC fig. 3 Tone Control fig.
DLT 300 3.0 Digital Transceiver and DLR 360 3.0 Digital Receiver Example 1: 2-way Mode, Tour Guide How it works 1. Tour Guide 1 speaks, using a DLT alone (built-in mic) or using it with a compatible headset mic. 2. Each Tour Group Member and Tour Guide 2 listen directly to Tour Guide 1, each using a DLT alone (built-in speaker) or using it with a compatible headset mic. 3. Tour Guide 2 then speaks, using a DLT alone (built-in mic) or using it with a compatible headset mic. 4.
DLT 300 3.0 Digital Transceiver and DLR 360 3.
DLT 300 3.0 Digital Transceiver and DLR 360 3.0 Digital Receiver 2-Way Setup for Tour Guide Operation (continued) 2-way Tour Guide Setup 1 2 3 4 Press and hold POWER button for 2 seconds to turn DLT ON Press and Hold and for 3 seconds to enter programming mode. The other icons will disappear and the current mode icon will be blinking on the screen. Use the buttons to change to 2-way Tour Guide mode. Press the button to select this mode and move to the next setting.
DLT 300 3.0 Digital Transceiver and DLR 360 3.0 Digital Receiver Example 2: Simultaneous Interpretation (1-way) How it works 1. The Main Speaker will use channel 0; Press the TALK button to activate the microphone 2. Each Interpreter unit will need to be assigned a channel number (1-14). The TALK button must be activated to send the interpretation to the attendees. 3. The floor speaks, using a DLT alone (built-in mic) or using it with a compatible headset mic. 4.
DLT 300 3.0 Digital Transceiver and DLR 360 3.
DLT 300 3.0 Digital Transceiver and DLR 360 3.0 Digital Receiver Example 3: Intercom (2,3,4,5, or 6-way party line) How it works 1. There must be one primary “Master 1” unit per group (for synchronization). How it Works: 6-way Intercom 2. Each secondary unit is set up as a “Guest”. 3. Up to six people can talk, and listen to each other, at the same time (6 Live mics). 4. In order to use this feature to it’s fullest, all units are programmed to be PnL, where the TALK button stays latched ON. 5.
Speak Only (Main Speaker) Receive / Speak (Interpreter) 1-way Repeater 1-way Receive Only 2-way Intercom 2-way (Tour Guide) 2-way Receive Only DLT 300 3.0 Digital Transceiver and DLR 360 3.
1-way Modes 2-way Modes 1-way DLT 300 3.01-way Digital Transceiver and DLR 360 3.0 Digital Receiver Speak Only Receive / Speak 1-way 1-way (Main Speaker) (Interpreter) Repeater Receive Only 2-way Intercom 2-way (Tour Guide) 2-way Receive Only Repeater Mode An additional DLT can be set-up as a repeater to increase the range of each channel. When repeater mode is used, the main speaker’s DLT is no longer the Master - the Master (unit all others sync to) now becomes one of the Guests.
DLT 300 3.0 Digital Transceiver and DLR 360 3.0 Digital Receiver Repeater Mode (continued) Any DLT’s in 2-way Listen-only Mode, or DLR’s, must be in the same Group. Each Listener would select a desired channel/ ORIGINAL language. (SAVE) See below - when repeater mode is used, the main speaker is not the master unit - the master (that all other units sync to) is a Guest unit. DLT 300 3.0’s FOR FLOOR AND INTERPRETERS CH 0 Main speaker (floor) CH 1 CH 2 CH 3...
DLT 300 3.0 Digital Transceiver and DLR 360 3.0 Digital Receiver Differences between DLT 300 3.0, DLT 100 2.0 and DLT 100 Function/Description DLT 300 3.0 DLT 100 2.
DLT 300 3.0 Digital Transceiver and DLR 360 3.0 Digital Receiver Differences between DLR 360 3.0, DLR 60 2.0 and DLR 60 Between 08/13 and 11/13, a limited number of DLR 60’s were manufactured and sold to the marketplace. If the front of the unit says “Digi·WAVE”, you have a DLR 60. If it says “DIGI·WAVE 2.0”, you have a DLR 60 2.0. Most units are the DLR 60 2.0, so this section may not apply to your product. Function/Description DLR 360 3.0 DLR 60 2.
DLT 300 3.0 Digital Transceiver and DLR 360 3.0 Digital Receiver Specifications DLT 300 3.0 Transceiver Dimensions Weight Color Enclosure Battery type Battery life Charge time 103.3 x 61.8 x 11.3 mm (4.07 x 2.43 x 0.44 inches) (H x W x D) 82 g (2.9 oz) including battery Black/Silver (Front/Back) Shatter resistant PC/ABS plastic Lithium Polymer with smart charge built into transceiver; 2000 mAH Up to 14 hrs talk time per charge Current consumption range: 36 mA @ idle to 89 mA w/1 Ch Tx and 3 Ch Rx 5 hrs.
DLT 300 3.0 Digital Transceiver and DLR 360 3.0 Digital Receiver Specifications DLR 360 3.0 Receiver Dimensions: Weight: 2.36” W x 3.54” H x 0.63” D (60 mm x 90 mm x 16 mm) 1.7 oz. (47g) without batteries. Frequency Band: 2.
DLT 300 3.0 Digital Transceiver and DLR 360 3.
DLT 300 3.0 Digital Transceiver and DLR 360 3.0 Digital Receiver FAQs What is the range of the system? Up to 100 ft outdoors and up to 200 ft indoors. (The range always depends on the environmental conditions). What is the benefit of this system over the 72 MHz (FM) systems? • DLTs can operate in two way mode. • Team teach/tour guide ability. • Relay feature increases range. • Harmonized frequencies for international use. • Secure communication with encryption and secure code.
DLT 300 3.0 Digital Transceiver and DLR 360 3.0 Digital Receiver FCC statements Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
IC Compliance Statement. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
DLT 300 3.0 Digital Transceiver and DLR 360 3.0 Digital Receiver 2-year Warranty Williams Sound products are engineered, designed, and manufactured under carefully controlled conditions to provide you with many years of reliable service. Williams Sound warrants the DLT 300 3.0 and DLR 360 3.0 against defects in materials and workmanship under normal use and conditions for 2 years from date of purchase.
10300 Valley View Rd • Eden Prairie, MN 55344 800-328-6190 / 952-943-2252 • FAX: 952-943-2174 www.williamssound.