Operating Instructions Please read the instructions carefully and keep it safe.
Bind Watch 1.Download and install App You can set up the watch through the “VeryFitPro” app for iOS orAndroid devices. The steps are shown as follows: Notes: The hardware platform of the equipment system shall meet requirements.I. Bind Watch iOS 8.0 version or above Andriod 4.4 system or above Correct operation: Scan the QRcode below or download VeryFitPro APP through the mobile APP store to pair with the watch. Support Bluetooth 4.
（2).Bind Device ID205L （3).Select product model: ID205L 2 ID205L （4).Click “Ok” to complete binding. 1 Notes: ①.During binding process, VeryFitPro will prompt you to enable GPS and Bluetooth, and authorize VeryFitPro to get access to the GPS on you mobile phone. ②. Apple phones need to click "pair", the watch has a variety of message reminders. Bluetooth Pairing Request “ID205L”would like to pair with your iphone. Cancel Pair 3.
Open the mobile APP> swipe down the page> sync prompt appears Notes! Please synchronize the data at least once within 7 days to avoid data loss at the watch end. Instruction for Use 1.Charging schematic Buckle the watch into the charger seat as shown in the picture. It needs to be charged to activate the watch when it is started for the first time. 72% Make sure the metal contacts of the watch and of the Charging dock match well, then the watch can be charged properly. 2.
Wear Replace the strap Switch Wear the wristband one finger away from the wrist bone and adjust the tightness of the wristband to a comfortable position. Flip the switch and take out the wristband ①.Wear Wear the wristband one finger away from the wrist bone and adjust the tightness of the wristband to a comfortable position. ②.Replace the strap Switch Flip the switch and take out the wristband Tip: Wearing too loosely may affect the accuracy of heart rate data. Operating Instructions 1.
2.Watch dial switch Replacing the dial interface will appear after long press the dial. 3.Main interface operation Swipe the screen to enter different interfaces (interactive interfacetile diagram) Notice bar Status bar Function list interface Data bar ①. Notice：Display notification message content. ②.Status： Heart rate Detection Wrist sense Do not disturb mode -5- Looking for mobile phone.
③.Data bar： ④.Function list interface：See below for Function Introduction。 4.Dial data view (default dial)。 Step press numberthe screen to Distance Calorie Long switch different data Function Introduction 1.Icon function introduction Perform a heart Enter the sports window, and choose rate test to check your heart rate different sports modes. Change the data for the day. sports mode on the APP Help you regulate View, turn off or your breathing and turn on the alarm relax your mood. clock.
Control music play on your mobile phone (watch cannot store music) Have the timing and countdown function. Record recent sportss. ①.Enter the sports window, and choose different sports modes.
⑤.Control music play on your mobile phone (watch cannot store music) ⑥.Have the timing and countdown function. ⑦.Record recent sports ⑧. settings Dial setting bright adjustment About. Shutdown.
2. Sleep detection: The watch automatically detects sleep all day, please wear a good watch when using it; Notes: For more functions and operation, please check the VeryFitPro software of the mobile phone. Product Parameters Model ID205L Screen type Battery capacity 210mAh Charging voltage Charging time about 2.5 hours Waterproof level Operating temperature Product frequency Battery life 1.3-inch color screen 5V±0.2V over 7days IP68 Weight of product 38g -20°C—40°C Bluetooth version BLE 4.
Frequently Asked Questions 1.Mobile APP search for the watch failed (1)It is recommended to update VeryFitPlus to the latest version. (2)It is recommended to close all programs, restart the Bluetooth, and then connect (3)Confirm whether the mobile phone system meets Android 4.4 or IOS 8.0 or above. 2.The watch received no alerts, text messages or phone calls (1)You need to turn on the smart reminder function and the call reminder switch in the APP, and synchronize to the watch.
synchronously after the exercise. (2)For the functions of call alert, message alert, find the phone, you need to turn on the mobile phone’s bluetooth, and maintain the connection with the mobile phone. More detailed questions can be answered with help and feedback in the APP. Operation steps:VeryFitPro > > help and feedback Matters Needing Attention ①.Watch data needs to be kept once every 7 days to avoid data loss. ②.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
