Operating Instructions Please read the instructions carefully and keep it safe. I. Bind Watch 1.Download and install App You can set up the watch through the “VeryFitPro” app for iOS or Android devices. The steps are shown as follows: Notes: The hardware platform of the equipment system shall meet requirements. 2. Bind process (1) 1.
(2) .Bind Device (3). Select product model: ID205 (4). Click “Ok” to complete binding. Notes: ① .During binding process, VeryFitPro will prompt you to enable GPS and Bluetooth, and authorize VeryFitPro to get access to the GPS on you mobile phone. ②. Apple phones need to click "pair", the watch has a variety of message reminders. 3.Synchronous data In daily wear, the watch can detect all kinds of product data. The user needs to connect the watch with bluetooth on the APP before synchronous operation.
Open the mobile APP> swipe down the page> sync prompt appears Notes! Please synchronize the data at least once within 7 days to avoid data loss at the watch end. II..Instruction for Use 1. Charging schematic Buckle the watch into the charger seat as shown in the picture. It needs to be charged to activate the watch when it is started for the first time. Pls be noted : Make sure the metal contacts of the and of the Charging dock match well, then the watch charged properly. 2.
①.Wear Wear the wristband one finger away from the wrist bone and adjust the tightness of the wristband to a comfortable position. ②.Replace the strap Switch Flip the switch and take out the wristband Tip: Wearing too loosely may affect the accuracy of heart rate data. III..Operating Instructions 1.
Left key setting steps: nction list > set > long press 2. Watch dial switch 3. Main interface operation Swipe the screen to enter different interfaces (interactive interface tile diagram) ①. Notice:Display notification message content. ②.
Looking for mobile phone. ③.Data bar: ④.Function list interface:See below for Function Introduction。 4. Dial data view (default dial) Click the screen to switch different data IV.Function Introduction 1.
① .Enter the sports window, and choose different sports modes. Change the sports mode on the APP (1) Start sports Click the sports icon countdown automatically > select the sports type > enter the sports (2) During sports Pause sports: short press the right key Restore sports: short press the right key (3) End sports End sports: long press the right key> select the end button on the screen ②.Perform a heart rate test to check your heart rate data for the day.
③.Help you regulate your breathing and relax your mood. ④.View, turn off or turn on the alarm clock. You need to add an alarm clock on the mobile APP. ⑤.Control music play on your mobile phone (watch cannot store music) ⑥.Have the timing and countdown function. ⑦.Record recent sportss. ⑧.
Dial setting,, bright adjustment,, Set the left button to enter which type of exercise,, Download the QR code of the app,, About., Shutdown., 2. Women’s health tracking Display location: in the data bar Women’s health tracking function, which is used for recording menstrual changes, tracks individual menstrual cycle and predicts ovulation (it needs to be enabled on the APP). 3.
VI.Cleaning and Maintenance It is recommended to wear and maintain according to the following three points: (1) Keep the product clean; (2) Keep the product dry; (3) Do not wear it too tight. Do not use household cleaners to clean the watch, butuse the soap free detergent. It is recommended to use alcohol to scrub stains that are not easy to remove. VII.Frequently Asked Questions 1. Mobile APP search for the watch failed (1) It is recommended to update VeryFitPlus to the latest version.
2. The watch received no alerts, text messages or phone calls (1) You need to turn on the smart reminder function and the call reminder switch in the APP, and synchronize to the watch. (2) The iphone needs to be paired with the watch via Bluetooth. column of "Synchronous Data" for details) (Please check the (3) You need to keep your watch connected to Bluetooth. 3.
Operation steps:VeryFitPro > > help and feedback Matters Needing Attention ①.Watch data needs to be kept once every 7 days to avoid data loss. ② .The watch has no waterproof effect on seawater, acidic and alkaline solutions, chemical reagents and other corrosive liquid. The damage or defects caused by misuse or improper use are not covered by the warranty. ③.Sports mode supports up to 6 hours of exercise at a time. ④ .