Installation manual Dimen sion s:W12" H12" EB. 5" L2 Bulb Type:E12 bulb n ot included Lamp Frame Weight(lbs):1.
Step 1 SAFETY Frame Parts List W a r n i n g : M AKE SURE THE ELECTRICITY TO THE WIRES YOU ARE WORKING ON IS SHUT OFF BY EITHER REM OVING THE FUSE OR TURNING OFF THE CIRCUIT BREAKER . CAUTION - Before assembling the lighting fixture,please read all instructions carefully. - All frame & crystal components are fragile,please handle with care. - Required supply circuit:110 - 130V/60Hz - Labeled wires are "L" for live wire, "N" for neutral wire, "E" for ground wire.
Please use the parts list to ensure you are not missing any parts PARTS LIST part E part picture Description Qty F ZA 00 Junction box not included 1 G 4"Crossbar 1 4. 7"Back plate 1 ZB zc «r�_;=--=-=i-=� �. � _/ .. ./ ZD Pl P2 I ,---�----------�---�--..,/""--, � ��/- P3 A B �� �) � C ��� I D � Knurled nut 2 4"Candle cover 2 Bobeche 4.
Step 2 Canopy installation instructions rzc> t:_-:! � �]}: iii] I� "L" = Hot wire H H N = Neutral wire E = Ground wire H H Important: Test sockets with bulb before dressing the fixture. 1. Attach the Crossbar(ZB)to the Junction Box(ZA)using the two crossbar screws(ZC)which are not supplied and should already be in your box. 2. Be sure when connecting the wire use electrician approved junction caps(ZG). 3. Stow the excess wire in the junction box(ZA). 4.
Step 3 Frame Assembly Diagram Frame Assembly Instructions Installation: Please read all instructions carefully. Before you proceed to install,make sure th at th e power supply is turned off and remains off until installation is complete. Please note th at each part h as been assigned a number. Please proceed in a numerical order. n I.Fix th e crossbar (01) on th e installation 4 junction-box(J-box). ��--03 01 -�- 2.
Cleaning and Maintenance of Chandelier Frame The finish on our chandelier frames and fixture frames is protected by a durable coating of lacquer. To clean, use a clean, soft, dry cloth. Do not use any metal polishes, cleaners, abrasives or any substance which could remove the protective finish. Failure to follow these instructions automatically voids the guarantee. Cleaning and Maintenance of Crystals Wet a soft cotton fabric in clean warm water and wipe gently, then polish with a dry soft cotton fabric.
Elegant Lighting Warranty The finish and frame of your new chandelier or fixture are warranted for a peri od of two(2)years from the date of purchase. Our company wi ll at i ts option,repair or replace any frame that has a defect in the material or workmanshi p duri ng the warranty peri od. All crystals are guaranteed for their original quality during the life of the chandeli er. Breakage i s not covered by this warranty.