Instructions / Assembly

ASSEMBLY INSTRUCTIONS
double signature glider
330-893-4212 • www.wildridge.com
LCC404
© 2016
Step 1
On a soft surface, place the seat (B) onto its side. Position the
backrest (A) inside the seat. Lay an arm/leg assembly into place as
shown (note: left and right) to the seat and backrest using (2) 5/16”
x 5” carriage bolts, (2) 5/16” x 3 1/2” carriage bolts and (1) 5/16” x 3”
carriage bolts and (5) 5/16” ange nuts. Repeat of other side.
Step 2
Now fasten center back with (2) 5/16” x 2” carriage bolts and (2)
5/16” ange nuts.
Hardware:
- (8) 5/16” x 3” Lag Bolts
- (2) 5/16” x 3” Carriage Bolts
- (4) 5/16” x 3 1/2” Carriage
Bolts
- (4) 5/16” x 5” Carriage Bolts
- (8) 5/16” Washers
- (12) 5/16” Flange Nuts
- (2) 5/16” x 2” Carriage Bolts
- (8) 3/8” x 2 1/2” Machine
Bolts
- (16) 3/8” Washers
- (8) 3/8” Locknuts
- (4) Glider Brackets
D
A
B
C
E
D
Required Tools:
- Mallet/Non Marring Hammer (Do not use Metal Headed Hammer)
- 1/2” Wrench or Socket
- #2 Square Drive bit
- 9/16” Wrench or Socket
- Cordless Drill
Parts:
A = (1) Backrest
B = (1) Seat
C = (2) Arm/Leg
Assembly
D = (2) Base Pieces
E = (2) Cross Members
(2) 5/16” x 3 1/2” Bolts &
(2) 5/16” Flange Nuts
(2) 5/16”
x 5” Bolts
& (2) 5/16”
Flange Nuts
(1) 5/16”
x 3” Bolts
& (1) 5/16”
Flange Nuts
A
B
C