Operating Instructions

Hello,
Thank you for purchasing our state of the art wildlife caller. The first
time you use your remote to play a sound, we at Wildlife Technologies
think you will recognize that you made a sound decision in buying our
product.
Our company is staffed with talented engineers which gives us a
distinct advantage over other companies marketing wildlife callers.
We are the only company in this industry to have in house ability to
research, design and manufacture our own products. If you have any
questions or seek wildlife calling advice please give us a call.
Best Regards,
Bill Martz
Tel: [phone] e-mail: [e-mail]
Changing Transmitter Channels
By default every caller has Channel ID "1"
By default every Remote has Channel ID "0"
The caller responds to every remote that transmits either on the caller's
channel ID or on ID "0"
Whenever you change the Remote's ID by entering 999100x with x=0 to 6
every caller that is currently in reception range changes it's channel ID to
the same value. This does NOT happen when you change the Remote's
ID to "0".
To change your transmitters ID do the following:
1-
Power on the caller and the remote. Press "9991002" and then the play
key to change the remote's and caller's ID to "2".
2-Verify that your caller now reacts to this remote.
3-If you want your Remote to operate all active caller’s in reception range,
turn on the Remote only and press “9991000” and then the play key.
Wildlife Technologies 2015
website: www.wildlifetech.com
Operating Instructions
MA-MAX
Service and repairs
For warranty service or repairs, visit our website listed below and ship the
product to the address listed on our website’s order page.
www.wildlifetech.com/pages/order.html
IMPORTANT
1-All repairs must have a note included in the box explaining
the problem and also the contact information of the sender.
2-All repairs must be shipped in a proper shipping box.
3-All repairs must be boxed with sufficient padding.
4-All repairs must be insured.
Failure to comply with all of the 4 shipping procedures listed above will
delay the repair turn around time.