User's Guide

Charge the headset
1. Connect USB cable to the Base Station; plug USB cable into USB port.
2. Place DuoLED Bluetooth headset into the Base Station.
3. When charging, the headset status LED turns red; when charged, headset status LED turns
blue.
The battery is fully charged in less than 3.5 hours.
Turn on / turn off
● Press and hold the Multi-function button for 3 seconds to turn on/ off.
● When turned on, the headset status LED flashes blue and the voice prompt announces “Power
on”.
● When turned off, the headset status LED flashes red and the voice prompt announces “Power
off”.
Other operations
For other operations which are not described in this Quick Guide, read the Wildix Phone Accessories
User Guide, available at: https://confluence.wildix.com/x/Ygo8AQ.
Technical specifications
● Bluetooth 4.2
● Talk time: up to 15 hours; Charging time: 3.5 hours.
● Working range: up to 30 meters.
● Ultra noise cancelling mic.
● Wideband audio frequency.
● Advanced hearing protection with safetone™.
● Status LEDs: online, away, DND/ conference, on call, ringing, call hold, missed call.
● Compatible with: Vision, SuperVision, WorkForce, WelcomeConsole, W-AIR LifeSaver, W-AIR.
Med, W-AIR Office, Android/ iOS apps, Apple Mac, Windows PC.
Other technical specifications are indicated in the Datasheet at
https://confluence.wildix.com/x/qwDzAw.
Technical changes and software upgrades
Wildix reserves the right to make changes to the data contained in this documentation without prior
notice. For software upgrades, contact your dealer.
Wildix
Wildix EE OÜ – Holding Company, Narva mnt 7-339A, 10117 Tallinn Estonia, VAT ID: EE101984698;
website: www.wildix.com
Wildix DuoLED Bluetooth Headset - English
Intended Use
This device is designed for use with a Wildix PBX and Wildix series products. Any other use is
considered unintended use. Any modification or reconstruction not described in the Quick Start Guide
is considered unintended use.
Safety precautions
Please read these precautions and the instructions on how to set up and use the headset thoroughly
before using it. Save this info sheet and do not give the device to third parties without it.
● Never use the headset in the rain, in the bathtub; do not touch it with wet hands.
● Make sure the charging contacts do not come into contact with conductive materials.
● It is recommended to disconnect the charger from the power supply during a thunderstorm.
● It is recommended not to place the charger on antique, veneered or wooden surfaces.
● Avoid placing the charger cord where people may trip over it. Avoid placing the cord where it
may be exposed to mechanical pressure as this may damage it. If the power supply cord or the
plug is damaged, disconnect the device and contact qualified service personnel.
● Charger and cord are for indoor installation only. Not for outdoor installation!
● Do not install the product in rooms with high humidity. Do not immerse product in water and do
not spill or pour liquids of any kind onto or into any parts of it.
● Do not install the product in surroundings at risk for explosions and do not use the headset in
such surroundings.
Additional safety information
● The operational temperature for the headset is between 0°C and + 40C (32°F and 104°F).
● Do not use the headset if you smell gas or other potentially explosive fumes.
● Medical devices might be adversely affected. Please consider the technical ramifications when
installing the devices in a doctor‘s office, for example.
● If you are wearing a hearing aid: Please note that the headset may cause an annoying
background noise.
● Your device and its enhancements may contain small parts. Keep them out of the reach of
small children.
● Remember to follow any special regulations in force in any area, and always switch off your
device when its use is prohibited or when it may cause interference or danger.
● Switch off your device when in any area with a potentially explosive atmosphere and obey all
signs and instructions.
● Operation of any equipment emitting radio frequency signals may interfere with the functionality
of inadequately shielded medical devices. Consult a physician or the manufacturer of the
medical device to determine if they are adequately shielded from external radio frequency (RF)
energy or if you have any other questions concerning this topic.
● FOR THE USA: Do not use near medical equipment.
Wildix DuoLED Bluetooth Headset - Quick Start Guide -4- Wildix DuoLED Bluetooth Headset - Quick Start Guide -1-