User's Manual

Logo Spy Gear

Name

Spy Seeker

Descriptor

Remote tracking device

Arrow / burst

SKU No.

Small Parts

Age Grading Ages 6 and Up

Copyline

Important: Please save this instruction sheet. It contains valuable product

information!

Feature Callouts Bug

Tracker

On/Off Buttons

LED power indicator

Sensor Grid

Subhead 1

PLAYING WITH YOUR SPY SEEKER:

1. ADULTS: Install the batteries (see below for directions)

2. Turn the Bug (small pod) on by pushing power button. LED indicator will

illuminate.

3. Turn the Seeker Unit (large pod) on by pushing power button. LED

indicator will illuminate.

4. Stash the Bug in something you wish to track down (like a backpack) or have

a friend hide it for you to find.

5. The Seeker Unit will beep and light up depending on how close you are to the

Bug.

6. Blue lights and slow beeping mean you're in range but farther away (COOL)

Yellow lights and medium beeping mean you're getting close (WARM)

Red lights and fast beeping mean you're very close (HOT!)

If the lights and beeping stop, but the indicator LED is still on, then you're out

of range.

PLAY TIPS:

• Have a friend hide with the Bug in their pocket, then try to find them!

• Treasure Hunt: Using a stopwatch, see who can locate the Bug first!

• Bomb Squad: Set a timer, then try to find the Bug before time is up!

Batteries/Subhead

BATTERY INFORMATION:

Spy Seeker takes 6 AAA batteries (3 for the Transmitter, 3 for the Seeker).

PAGE 1
Logo Spy Gear Name Spy Seeker Descriptor Remote tracking device Arrow / burst SKU No. Small Parts Age Grading Ages 6 and Up Copyline Important: Please save this instruction sheet. It contains valuable product information! Feature Callouts Bug Tracker On/Off Buttons LED power indicator Sensor Grid Subhead 1 PLAYING WITH YOUR SPY SEEKER: 1. ADULTS: Install the batteries (see below for directions) 2. Turn the Bug (small pod) on by pushing power button. LED indicator will illuminate. 3.
PAGE 2
ADULTS: To install or change batteries (each unit) 1. Using a Philips screwdriver, loosen the screw on the battery cover. The screw will not fall out. 2. Remove the cover. 3. Install three fresh AAA alkaline batteries in each unit, following the diagram engraved inside the battery box. IMPORTANT: Make sure to install batteries in each unit AS SHOWN: two up, one down. If your Seeker does not work, double check the battery positions. 4. Reinstall the battery cover and tighten the screw. Battery Safety: 1.