User Manual
112
Wiha DuraBit.
A diamond among bits.
Wiha DuraBit.
•
Extremely wear-resistant
hard-metal coating also used
in the aerospace industry
gains a secure hold in the
screw head. Outstanding
reduction of CamOut forces
prevents slipping out of the bit
•
Wolfram carbide particles
guarantee a significantly
greater service life when
compared to conventional
diamond-coated bits
•
Nickel coating of the
entire bit for extra-long
corrosion resistance
•
Clear reduction in the cam-out
effect (slipping of the bit out
of the screw head) for:
– Fatigue-free work
(less force required)
– Less wear of bit and screw
– Safe work on delicate
surfaces
•
Work with Wiha DuraBits
featuring torsion zones
reduces the amount of time
for fastening and enables
economic and safe work
Long-lasting, durable wolfram carbide
coating increases service life of the bit
by many times when compared to a
diamond-coated bit. The subjacent nickel
coating ensures extra-long corrosion
resistance.
Non-corroding nickel coating.
Wolfram carbide particles.
The Dura coating reduces CamOut
effects to an unbeatable minimum –
no more slipping out of the bit from
the screw head.
With DuraBit, Wiha puts its innova-
tive strength to the test. The tough
torsion bit has an extremely wear-
resistant hard-metal coating that
gains a secure hold in the screw head.
This revolutionary coating technology
originates from the aerospace
industry and guarantees outstanding
gripping of the bit surface.
The user quicklycomes to appreciate
the benefits: a longer tool life,
much reduced cam-out effects and
superior handling enable efficient
work, even with the most difficult of
applications.
The wolfram carbide particles are
permanently applied to the bit tip –
a breaking away of the particles
(as occurs with conventional,
diamond-coated bits) is therefore
significantly reduced.
The extremely wear-resistant
hard-metal coating considerably
increases tool life.