MB210 / MB220 USER GUIDE 1313 © 2005-2008 Wi-Gear Inc. All rights reserved. iMuffs, Wi-Gear, and the Wi-Gear logo are trademarks of Wi-Gear Inc. The Bluetooth word mark and logo are owned by the Bluetooth SIG, Inc. and any use of such marks by Wi-Gear Inc. is under license. iPod and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. All other products and services may be marks of their respective owners. Printed in China. www.wi-gear.
Contents Regulatory Information Introduction 1 What's included in this package? 2 Product Features 3 Getting Started 5 Playing Music 6 Bluetooth phone operation 8 Troubleshooting 10 Specifications 11 Regulatory Information 13 FCC Compliance Statement This device complies with part 15 of the FCC Rules.
Introduction Battery Battery Type: Lithium-Polymer 550mAh (built-in, not user-serviceable) g g g Charge Time: Quick charge, 80% in 2 hours / Full charge in 5 hours 1 Up to 20 hours of continuous operation of the headphones depending on usage pattern, distance from adapterttery age. iMuffs Adapter is dependent on iPod or iPhone’s actual battery capacity.
What's Included in this Package? g iMuffs Wireless Headphones g iMuffs Dock Adapter for iPod / iPhone (see below) g Travel charger / adapter g USB cable g User Guide Specifications Wireless Range 9 - 40 feet (3 - 12 meters) Actual range depends on environmental factors: orientation of devices relative to each other, obstructions and enclosures, radio frequency noise, and interference.
Troubleshooting Headphone Features If you have problems using the iMuffs Stereo Bluetooth Headphones, this section may help. For further assistance, please visit www.wi-gear.com. Familiarize yourself with all of the controls located on the right side of your iMuffs headphones. Please note that the two LEDs are visible only when lit. Most problems can be resolved with a simple reset. Switch the headphones off, and then on. Unplug the adapter from the iPod, plug it back in.
Adapter Features Using with a paired Bluetooth phone The iMuffs Adapter is powered directly by the iPod / iPhone. Plug the adapter into the appropriate port of your compatible iPod. See page 2 regarding iMuffs Adapter compatibility to your iPod / iPhone. When the phone rings (you will hear an audio tone in the speakers), answer the call by pressing the Play/Pause/Phone button.
Bluetooth Phone Operation Getting Started Your iMuffs headphones work with Bluetooth-enabled phones. However, you will first need to pair the headphones with your Bluetooth phone before they work. Your iMuffs headphones are powered by a built-in rechargeable battery. Before using your iMuffs for the first time, you should fully charge the battery. Initial Pairing with a Bluetooth phone Charging 1. Make sure the adapter is UNPLUGGED from your iPod / iPhone and your iMuffs headphones are powered off.
Playing Music The iMuffs Dock Adapter for iPod / iPhone enables the iPod / iPhone to transmit a stereo audio signal wirelessly to your iMuffs Stereo Bluetooth Headphones, with a range of 40 feet (12 meters). 1. Turn your iMuffs headphones on with the power switch. 2. Plug the Bluetooth adapter into the dock connector port located on the bottom of your iPod or iPhone. For iPhone users: A message will appear on the screen (see below). Select “No”.
Playing Music The iMuffs Dock Adapter for iPod / iPhone enables the iPod / iPhone to transmit a stereo audio signal wirelessly to your iMuffs Stereo Bluetooth Headphones, with a range of 40 feet (12 meters). 1. Turn your iMuffs headphones on with the power switch. 2. Plug the Bluetooth adapter into the dock connector port located on the bottom of your iPod or iPhone. For iPhone users: A message will appear on the screen (see below). Select “No”.
Bluetooth Phone Operation Getting Started Your iMuffs headphones work with Bluetooth-enabled phones. However, you will first need to pair the headphones with your Bluetooth phone before they work. Your iMuffs headphones are powered by a built-in rechargeable battery. Before using your iMuffs for the first time, you should fully charge the battery. Initial Pairing with a Bluetooth phone Charging 1. Make sure the adapter is UNPLUGGED from your iPod / iPhone and your iMuffs headphones are powered off.
Adapter Features Using with a paired Bluetooth phone The iMuffs Adapter is powered directly by the iPod / iPhone. Plug the adapter into the appropriate port of your compatible iPod. See page 2 regarding iMuffs Adapter compatibility to your iPod / iPhone. When the phone rings (you will hear an audio tone in the speakers), answer the call by pressing the Play/Pause/Phone button.
Troubleshooting Headphone Features If you have problems using the iMuffs Stereo Bluetooth Headphones, this section may help. For further assistance, please visit www.wi-gear.com. Familiarize yourself with all of the controls located on the right side of your iMuffs headphones. Please note that the two LEDs are visible only when lit. Most problems can be resolved with a simple reset. Switch the headphones off, and then on. Unplug the adapter from the iPod, plug it back in.
What's Included in this Package? iMuffs Wireless Headphones iMuffs Dock Adapter for iPod / iPhone (see below) Travel charger / adapter USB cable User Guide Specifications Wireless Range 9 - 40 feet (3 - 12 meters) Actual range depends on environmental factors: orientation of devices relative to each other, obstructions and enclosures, radio frequency noise, and interference.
Introduction Battery Battery Type: Lithium-Polymer 550mAh (built-in, not user-serviceable) g g g Charge Time: Quick charge, 80% in 2 hours / Full charge in 5 hours 1 Up to 20 hours of continuous operation of the headphones depending on usage pattern, distance from adapterttery age. iMuffs Adapter is dependent on iPod or iPhone’s actual battery capacity.
Contents Regulatory Information Introduction 1 What's included in this package? 2 Product Features 3 Getting Started 5 Playing Music 6 Bluetooth phone operation 8 Troubleshooting 10 Specifications 11 Regulatory Information 13 FCC Compliance Statement This device complies with part 15 of the FCC Rules.
MB210 / MB220 USER GUIDE 1313 © 2005-2008 Wi-Gear Inc. All rights reserved. iMuffs, Wi-Gear, and the Wi-Gear logo are trademarks of Wi-Gear Inc. The Bluetooth word mark and logo are owned by the Bluetooth SIG, Inc. and any use of such marks by Wi-Gear Inc. is under license. iPod and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. All other products and services may be marks of their respective owners. Printed in China. www.wi-gear.