Whynter 50 Pint Portable Dehumidifier with Built-in Pump in White, Energy Star Model # : RPD-506EWP INSTRUCTION MANUAL Congratulations on your new Whynter product. To ensure proper operation, please read this Instruction Manual carefully before using this product. Keep this manual in a safe place for future reference.
DISPOSAL INFORMATION Thank you for choosing the Whynter Portable Dehumidifier. Please follow the instructions provided in this user guide to obtain the very best performance from your dehumidifier. We trust that your Whynter dehumidifier will provide the performance and reliability that we stand for. Your Whynter dehumidifier is designed to remove moisture in the air by condensation removal and collecting the condensation water in the drain bucket or draining through a drain hose.
TABLE OF CONTENTS PAGE DISPOSAL INFORMATION 2 SAFETY PRECAUTIONS 4 INTRODUCTION / TECHNICAL DATA 5 PARTS AND CONTROLS 6-9 OPERATION INSTRUCTIONS 10 - 11 WATER DRAINAGE INSTRUCTIONS 12 - 13 MAINTENANCE 14 TIPS ON WHEN TO USE YOUR PORTABLE DEHUMIDIFIER 15 TROUBLESHOOTING 16 - 17 WARRANTY INFORMATION 18 3
SAFETY PRECAUTIONS WARNING TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY WHEN USING YOUR PORTABLE DEHUMIDIFIER, FOLLOW THESE BASIC PRECAUTIONS: Read all instructions before using the appliance. Never clean appliance parts with flammable fluids. The fumes can create a fire hazard. Do not use an excessively wet cloth, industrial solvents, and oil-based products to clean this appliance.
INTRODUCTION How it Works When the dehumidifier is started, the fan begins to pull moisture-laden air across the dehumidifying coils. The coils condense or draw moisture from the air, and air flows through the top louver into the room as dry, warm air. Moisture removed from air is collected in a drain bucket on the front of the dehumidifier. The appliance is designed to operate between 41 ° F (5 ° C), and 90 ° F (32 ° C).
PARTS AND CONTROLS OTHER ACCESSORIES: 1. 20“ Continuous/ Gravity Drain hose 2. 16.5 ft. pump drain hose 3. Power Cord Buckle Power Cord Buckle Installation For easy storage, install the power cord buckle to the rear of the unit. Once installed, the power cord can be wrapped using the buckle for safe storage.
PARTS AND CONTROLS 5. Timer Button Press to activate the Timer delay feature, in conjunction with the Timer Control Buttons. Timer Delay Switch Off When the appliance is ON, press the Timer button to activate Auto-stop function and the Timer OFF light will come on. Set the desired time delay OFF hours by pressing the and buttons. The time increments are 1 hour up to 24 hours. When the delay time set has elapsed, the appliance switches off.
PARTS AND CONTROLS Bucket Full Indicator The appliance will run continuously until the set RH% is reached or when the drain bucket is full. When the drain bucket is full, the Full indicator light will illuminate and the dehumidifier will stop operating. Remove the water in the bucket with two hands, then place the drain bucket back to it's proper position and the machine will start operating again.
OPERATION INSTRUCTIONS AIR FILTERS INSTALLATION Your Whynter portable dehumidifier is equipped with washable pre-filter. This pre-filter removes large particles such as dust, pet hair and dander. WARNING: NEVER OPERATE THE DEHUMIDIFIER WITHOUT THE FILTER START OPERATION 1. Ensure that the appliance is connected to the power socket. 2. Make sure the drain bucket is placed in proper position. 3. Make sure filter is installed. (Fig. 1) 4.
OPERATION INSTRUCTIONS POSITIONING THE UNIT This dehumidifier is intended for indoor residential applications only and should not be used for commercial or industrial applications. Place the dehumidifier on a smooth, hard and level floor strong enough to support the appliance with a full bucket of water. Do not attempt to roll the appliance over objects. Avoid placing the appliance in an area where the temperature will fall below 53°F.
WATER DRAINAGE INSTRUCTIONS Using a portable dehumidifier requires that collected water be emptied frequently. Draining water from this unit can be done in 3 different methods: 1. DRAIN BUCKET METHOD 1. When the bucket is full, the Full indicator light will light. The compressor and fan will turn off, the Full indicator will light, and a P2 Fig. 3 code will be displayed. 2. It is recommended to turn the unit off before removing the drain bucket. 3.
WATER DRAINAGE INSTRUCTIONS 2. CONTINUOUS / GRAVITY DRAIN METHOD Water can be automatically emptied into a floor drain by attaching the 20” continuous/gravity drain hose to the continuous/gravity drain outlet. To use gravity to drain your portable dehumidifier, it must be installed on a level surface or at least 12 inches above the ground, on a sturdy table or shelf unit. When using the function of continuous/ gravity drainage, your drain hose must be placed horizontally below the drainage hole.
MAINTENANCE CAUTION: Always turn off and unplug the dehumidifier before cleaning 1. Cleaning the air grille and main unit Use a damp cloth to wrap the main unit or use water and a mild detergent. Do not use bleach, chemicals or abrasives. Do not splash water directly onto the unit. Doing so may cause an electrical shock, cause the insulation to deteriorate, or cause the unit to rust. Use a vacuum attachment or brush to clean the air intake and outlet grilles. 2.
TIPS ON WHEN TO USE YOUR PORTABLE DEHUMIDIFIER If you have respiratory problems, asthma and allergies, your Whynter Portable Dehumidifier is a great option for controlling moist environments. Creating dry air can keep indoor air pollutants at a more manageable level, especially when used in conjunction with an air purifier. Using your portable dehumidifier can help you save money in the long run because it uses relatively little power and can help furnaces and air conditioners operate more efficiently. 1.
TROUBLESHOOTING Many common portable dehumidifiers problems are easily resolved. Try the troubleshooting suggestions below to see if the problems can be resolved before having to contact the service department. Problem The dehumidifier does not operate. Possible Causes Power failure / outage. The automatic switch, line fuse, or breaker has been tripped. The power supply voltage is too low. The power cord is damaged. The dryness level you selected has been reached.
TROUBLESHOOTING Many common portable dehumidifiers problems are easily resolved. Try the troubleshooting suggestions below to see if the problems can be resolved before having to contact the service department. Problem The dehumidifier leaks. The dehumidifier does not operate. Possible Causes Solutions Continuous/gravity drain hose is loose. Cracked drain bucket. Secure the drain hose. Power failure or outage. The automatic switch, line fuse, or breaker has been tripped.
ONE YEAR LIMITED WARRANTY This WHYNTER product is warranted to the original owner, purchased from an authorized Whynter dealer within the 48 U.S. continental states, for one year from the original purchase date against defects in material and workmanship under normal residential usage. Should your WHYNTER product prove defective within one year from the date of purchase, contact Whynter’s Customer Support Team with the serial number and proof of purchase to make a warranty claim.
