ASSEMBLY INSTRUCTIONS LVOV COD 15231W1 Thank you for you purchase. Be fare assembly, please read these instructions. Please read all warnings. Store this instruction manual for future reference.
Parts 1 Top Panel 2 Bottom Panel t ide Panel (R} ide Panel {5 center Panel 1Pc Drawer Back 1Pe ~~ Back Support »*Panel 6 Pcs Panel 1Pc . . 1Pe¢ ~-Drawer Side Back Mdf Board | 2 Pcs “Panel 12 Pes 1Pe Drawer Face > Drawer Mdf 1pc panel PCs placard 6 Pcs Assembly Information e-Agsemble screws Assemble Wood Dowels = Assemble Mini fix 1. Screw up to half poi to make sure all spots are lined up . Insert dowels into holes 1 tight Screw Up Mini fix M5X24MM 2. into holes: Tighten all Mini fix.
Assembly Step Failure to follow these directions could cause poor strength or stability. Insert screws loose to line up with slots then tighten up each screw.
Assembly Step (Continue) Sets drawer 12 #6 Sets drawer # Make sure the non-.. wheeled part of the drawer is touching the front of the drawer. # Screws in holes a, b and c. # DL for left drawer # DR for.
Safety Please read the below warnings before use. Failure to follow these warnings could result in serious injury. CAUTION HH Purpose = Do not (ise this unit except for original application = This unit is for household use. Do not use it for wholesale. = This unit is for indoor use. Do not use it outside.
-~Part include CANTETIP™ 4 WITH ANTE TIP Installation Instruction : A tip restraint must be attached to a wall stud using the 27 screw sh closed. Attach a strap to the back top ral or back top edge of the furniture using the 5/8" screw provided. Locate the strap on the wall over a wall stud. and 2 inches. below. the mounting strap secured to the back of your uni. Attach to the wall stud using the 2" screw provided, through the smaller-hole.