Assembly Instructions

HARDWARE LIST

ITEM DESCRIPTION

QTY

JCBC Bolt M6 x 45mm 4 PCS

WOOD SCREW M4 x 45mm 6 PCS

WOOD DOWEL M8 x 30mm 8 PCS

M6 SPRING WASHER 4 PCS

M4 ALLEN KEY (BALL SHAPE)

1 PC

Read this instruction carefully. See hardware and furniture part list for guidance.

Be sure all parts are complete, before you assemble. Place all wooden furniture

parts on a clean and flat soft surface to prevent from being scratched.

Follow the figure to start assembling.

CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.

2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.

3. Keep all hardware parts out of reach of children.

NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.

Tool needed : Screwdriver & Rubber Mallet (not provided).

ASSEMBLY INSTRUCTIONS

MODEL : BBT5391 - DC

1 OF 3

STEP 1 STEP 2

FRONT

PART LIST

ITEM DESCRIPTION

QTY

CHAIR LEG (L)

1 PC

CHAIR LEG (R)

1 PC

SUPPORT RAIL 2 PCS

CHAIR 1 PC

PAGE 1
ASSEMBLY INSTRUCTIONS MODEL : BBT5391 - DC Read this instruction carefully. See hardware and furniture part list for guidance. Be sure all parts are complete, before you assemble. Place all wooden furniture parts on a clean and flat soft surface to prevent from being scratched. Follow the figure to start assembling. CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed. 2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread. 3.
PAGE 2
ASSEMBLY INSTRUCTIONS STEP 3 2 OF 3 STEP 4 FRONT BACK R C FRONT C BACK FRO NT R L B R A 5 5 STEP 3.1 STEP 3.2 STEP 4.2 1 1 4 4 STEP 4.
PAGE 3
ASSEMBLY INSTRUCTIONS STEP 5 STEP 6 Note : Follow the line drawing to assemble the chair leg.