BBT5281. 5PC Dining Set

Table Of Contents

HARDWARE LIST

ITEM DESCRIPTION

QTY

1 JCBC Bolt M6 x 50mm 4 PCS

2 WOOD SCREW M4 x 38mm 4 PCS

3 WOOD DOWEL M10 x 40mm 8 PCS

M4 ALLEN KEY (BALL SHAPE)

1 PC

Read this instruction carefully. See hardware and furniture part list for guidance.

Be sure all parts are complete, before you assemble. Place all wooden furniture

parts on a clean and flat soft surface to prevent from being scratched.

Follow the figure to start assembling.

CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.

2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.

3. Keep all hardware parts out of reach of children.

NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.

Tool needed : Screwdriver & Hammer (not provided).

ASSEMBLY INSTRUCTIONS

MODEL : BBT5281 ARM CHAIR

PAGE 1 OF 2

STEP A

STEP B

STEP 1 STEP 2

PART LIST

ITEM DESCRIPTION

QTY

A CHAIR 1 PC

LEG (L)

1 PC

LEG (R)

1 PC

SUPPORT RAIL (LONG)

1 PC

SUPPORT RAIL (SHORT)

1 PC

LONG

SHORT

PAGE 1
ASSEMBLY INSTRUCTIONS MODEL : BBT5281 ARM CHAIR Read this instruction carefully. See hardware and furniture part list for guidance. Be sure all parts are complete, before you assemble. Place all wooden furniture ITEM A parts on a clean and flat soft surface to prevent from being scratched. B Follow the figure to start assembling. CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed. 2.
PAGE 2
ASSEMBLY INSTRUCTIONS STEP 3 STEP 4 PAGE 2 OF 2 L x4 R 2 A 2 Note : Follow the line drawing to assemble the chair leg.
PAGE 3
ASSEMBLY INSTRUCTIONS Read this instruction carefully. See hardware and furniture part list for guidance. Be sure all parts are complete, before you assemble. Place all wooden furniture parts on a clean and flat soft surface to prevent from being scratched. Follow the figure to start assembling. PART LIST ITEM A B CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed. 2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread. 3.