Instructions / Assembly

6021-368 Double Adjustable Garment Rack ©2013 Whitmor, Inc.
A 4 ea
End connector
B 2 ea
Double bar
connector
C 4 ea
Wheel
D 4 ea
Black horizontal base tube
E 4 ea
Black vertical tube
H 2 ea
Base connector
F 4 ea
Chrome vertical tube
G 2 ea
Chrome horizontal hanging tube
Assembly
Time:
Less than
15 minutes.
This product's intended use
is for hanging garments.
Tools Needed: No tools required.
Part Reference
A
B
C
D
E
F
G
H
F6190
F6191
F6192
F6193
F7022
F6195
F6196
F7023
Rev#8 12.22.13
STEP 1. Assemble the bottom section by inserting
horizontal base tubes (D) into base connectors (H).
STEP 2. Align the groove in black
vertical tube (E) with notch in base
connector (H) and push each tube
into holes on top of
base connectors until
firmly seated. Red
stickers are placed on
parts (E & H) to help
align the notches.
STEP 3. Align holes in double bar
connector (B) with top end of black
vertical tube (E) and press (B) down
onto (E) until seated. Open the
locking tabs on double bar
connector (B) then Insert chrome
vertical tubes (F) into (B) and (E).
Slide chrome vertical tubes down to
your preferred height until the push
button tabs line up with the nearest
hole and snap into place. Lock the
locking tabs on (B).
STEP 4. Attach end connectors
(A) onto each end of chrome
horizontal hanging tube (G). Attach
the assembled (A) and (G) to the
chrome vertical tubes (F).
STEP 5. Insert wheels (C) into
(H) in the bottom of the assembled
unit. This completes assembly of
your Double Adjustable Garment
Rack.
Note:
Locking tabs
should face
inward.
B
B
F
F
F
F
C
C
C
C
D
H
H
E
H
E
A
A
G
E
E
E
E
F
F
Printed in China
8680 Swinnea Road • Suite 103 • Southaven, MS • 38671
NEED HELP? For help with assembly, or if you are missing a part,
please call Whitmor’s Customer Service Department, 1-888-944-8667
between 8 a.m. and 4:30 p.m. (Central Standard Time) Monday
through Friday. Or email: [e-mail]. Visit us
online at www.whitmor.com
MADE IN CHINA