Quick Start Guide
STEP 1. ADD
HE DETERGENT
Designed to use only HE
(High Efficiency)detergents.
NOTE: See ADDING
LAUNDRY PRODUCTS
(below) for more
information on adding HE
detergent, fabric softener,
and/or bleach.
STEP 2. LOAD CLOTHES
For best results, load garments in loose
heaps evenly around the basket wall.
STEP 3. PRESS POWER
TO TURN ON THE
WASHER
STEP 4. SELECT THE DESIRED
CYCLE FOR YOUR LOAD*
STEP 5. ADJUST CYCLE
SETTINGS, IF DESIRED
STEP 6. SELECT ADDITIONAL
OPTIONS*
STEP 7. PRESS AND HOLD START/PAUSE TO BEGIN CYCLE
NOTE: Start button must be held for
1 second to start cycle. Once the status
lights are illuminated, release the start
button.
*Not all cycles, settings or options are available with all models.
QUICK START GUIDE
WHIRLPOOL
®
TOP LOADING WASHING MACHINE
OPERATING INSTRUCTIONS
Fire Hazard
Never place items in the washer that are dampened
with gasoline or other flammable fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type of
oil on it (including cooking oils).
Doing so can result in death, explosion, or fire.
WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS, located in
your appliance’s Owner’s Manual, before operating this appliance.
1
POWER
Press to turn on/off or to stop/cancel a cycle.
2
CYCLE KNOB
Turn knob to select desired cycle.
3
START/PAUSE
Press and hold the Start/Pause button for 1 second until all status lights
are illuminated, then release to start cycle. Press during a cycle to pause
cycle and unlock lid.
NOTE: If machine is spinning it may take longer to unlock lid.
4
CYCLE MODIFIERS (Not all modifiers are available on all cycles)
TEMP
Press to modify the cycle’s available temperatures (Tap Cold, Cold, Cool,
Warm, or Hot).
NOTE: Pressing Temp will toggle through available temperature
options. When no lights in the temperature column are illuminated
the selected temperature is Tap Cold.
RINSE OPTIONS
Press to modify the cycle’s available rinse options. Press once for Fabric
Softener, twice for Extra Rinse and three times to activate both.
FABRIC SOFTENER
Select this option to let the machine know when you have added
liquid fabric softener.
EXTRA RINSE
Select this option to add a second rinse.
W11428538C
®
/™ ©2020 Whirlpool. All rights reserved. Used under license in Canada. 09/20
*Appearance may vary depending on model.
PRETREATING BEFORE A WASH CYCLE
■ Press the Faucet button once to
turn on and press again to turn off.
■ Faucet will automatically shut off
after 10 minutes or when max
water level is reached.
■ Water will automatically drain if
water level becomes too high.
Water will also drain after
10 minutes if the lid is left open or
3 hours if the lid is left closed.
OPTIONS
Press to add or remove options for each cycle. Press once to add a
30 min PreSoak, twice to activate Deep Water and three times for both.
DEEP WATER
Use this option to automatically add more water to your wash cycle.
You can also use this option to reduce the likelihood of white
residue on dark clothing.
30 MIN PRESOAK
Touch to add a 30 minute presoak period to help loosen tough
stains. The washer will fill, pause to soak, and then begin the
selected cycle.
FAUCET
Press to access an instant water stream. Use this feature to pretreat
clothes and other items right in the washer. You can also use this feature
to manually add water to the machine as desired.
NOTE: The washer will drain at the beginning of the cycle if a large
volume of water is detected to ensure the machine can correctly
sense the load size.
CONTROL PANEL AND FEATURES
1
3
2
4
ADDING LAUNDRY PRODUCTS
IMPORTANT: Using non-HE detergent will likely result in longer cycle
times and reduced rinsing performance. It may also result in component
malfunction and, over time, buildup of mold or mildew. HE detergents
should be low-sudsing and quick-dispersing to produce the right amount
of suds for the best performance.
ADDING HE DETERGENT TO BASKET
Add a measured amount of HE
detergent or single-dose laundry
packets into the basket. If using
oxi-type boosters,
color-safe bleach, or fabric
softener crystals, add to the
bottom of the washer basket
before adding clothes.
NOTE: Follow the manufacturer’s instructions to determine the amount of
laundry products to use.
ADDING LIQUID CHLORINE BLEACH
Do not overfill, dilute, or use more than 1
cup (236 mL). Do not use color-safe bleach
or oxi products in the same cycle with liquid
chlorine bleach.
ADDING LIQUID FABRIC SOFTENER TO DISPENSER
Pour a measured
amount of liquid
fabric softener into
dispenser; always
follow manufacturer’s
directions for correct
amount of fabric
softener based on your load size. Dilute liquid fabric softener by filling the
dispenser with warm water until liquid reaches the underside of the rim.
See Max Fill line arrows.
IMPORTANT: Fabric Softener option must be selected to ensure proper
distribution at correct time in cycle.
ASSISTANCE OR SERVICE AND ADDITIONAL INFORMATION
For information on any of the following items, a full cycle guide, detailed product dimensions, or for complete instructions for use and installation, please
visit www.whirlpool.com/owners, or in Canada www.whirlpool.ca/owners. This may save you the cost of a service call.
Register Product Schedule Service How To’s & FAQ Manuals &
Downloads
Add Service Plan Parts Accessories
To speak with a customer service representative or if you have additional questions, call us toll free at
1-866-698-2538 or in Canada call 1-800-807-6777.
You can write with any questions or concerns at:
Whirlpool Brand Appliances
Customer eXperience Center
533 Benson Road
Benton Harbor, MI 49022-2692
Whirlpool Brand Appliances
Customer eXperience Center
Unit 200-6750 Century Ave
Mississauga, Ontario L5N 0B7
Please include a daytime phone number in your correspondence.
Model & Serial
Number Tag
location
MORE WATER WHEN YOU WANT IT
AUTO SENSING AND DEEP WATE R
■ The washer will adjust the water level to the optimal
amount for a High Efficiency wash of the detected
load size.
■ Press Deep Water to automatically add more water
to your wash cycle.
■ It is recommended to use BULKY ITEMS cycle with
Deep Water option for loads where maximum water
level is desired.
■ Expect longer cycle times due to extended fill
duration when using the Deep Water option.
CLEANING WITH LESS WATER
The washer has been designed and optimized to provide
a thorough cleaning using less water to conserve energy
and resources.
As the washer dampens and moves the load, the level of
the items will settle in the basket. This is normal, and does
not indicate that more items should be added.
IMPORTANT: You will not see a full basket of water as
with older, less efficient washing machines. It is normal for
some of the load to be above the water line.
For detailed installation instruction and maintenance information, winter storage, and transportation tips, please see the Owner’s Manual included with your
machine.
A cycle guide for your washer can
be found online at www.whirlpool.
com
.
The document will help
identify which cycle to choose for
various load types as well as the
default cycle options. For example
we recommend using the NORMAL
cycle with Warm water for cottons,
linens and mixed-garment loads.
CHOOSING THE RIGHT CYCLE
WARNING: Do not wash water-resistant or water repellant-type clothing.
Failure to closely follow these instructions may result in an abnormal
vibrating and out-of-balance condition that could result in physical injury,
property damage, and/or appliance damage.
NOTE: If the washer detects an out-of-balance condition it may pause
and attempt and re-distribute the load. During this time the Sense and
Wash status indicators will both briefly illuminate.