Dimension Guide

Electric Dryer
PRODUCT MODEL NUMBERS
W10562335B
08/2013
WED8000B, WED8100B,
WED8500B, WED8900B
Back view
Side view
Models with riser
DRYER DIMENSIONS
Models without riser
Back view
Side view
Bottom view:
NOTE: Most installations require a minimum of 5" (127 mm)
clearance behind dryer for exhaust vent with elbow. See “Venting
Requirements.”
All dimensions show recommended spacing allowed,
with tested spacing of 0" (0 mm) clearance on sides
and rear.
Additional spacing should be considered for ease
of installation and servicing.
Additional clearances might be required for wall,
door, and oor moldings.
Additional spacing should be considered on all
sides of the dryer to reduce noise transfer.
For closet installation, with a door, minimum
ventilation openings in the top and bottom of the
door are required. Louvered doors with equivalent
ventilitation openings are acceptable.
Companion appliance spacing should also be
considered.
Spacing for recessed area or closet installation

Summary of content (2 pages)