EN Operating Instructions
en GENERAL SAFETY INSTRUCTIONS • • • • • • • • 2 This appliance must not be used by children. Keep the appliance and its cord out of reach of children. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
A B C 3’/5’ D E hotpoint.co.
14 15 13 12 16 18 10 17 19 11 9 8 7 5 6 20 MAX __ 4 3 1 2 SM S15 CAW UK 4 21
en DESCRIPTION APPLIANCE 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21.
en C) • • • • • • • • • • • • • • • • • • 6 To avoid circuit overload, do not operate another appliance on the same socket. D) Do not try to disassembly or repair the appliance. Incorrect reassembly can cause a risk of electrical shock or injury to persons when the appliance is used. E) Do not point mop head towards electrical devices, mains, cables, etc. or inside ovens. During cleaning keep sufficient distance from sockets that are installed in the floor. Keep your work area well lighted.
en Water hardness Proportion [tap water:demineralised water] Soft 1:0 Medium 1:1 Hard 0:1 Soft Medium Hard 8. 9. To switch off the unit unplug the cord from the socket. Let the unit cool down for 3-5 minutes on the carpet glider before storage. The product is hot and the pad wet after the usage. Be careful to not damage delicate flo- ors. 10. Wrap the cable. 11. Remove the cleaning pad. Do not store with a wet pad attached. 12. Wipe the metal plate with a soft, dry cloth. 13.
en 4. If there are loose threads on the microfibre cleaning pad carefully cut the thread with scissors. Do not pull on them or cut at the base. PRODUCT SPECIFICATION Model After using the appliance, the plate is hot. Let it cool down 3-5 minutes before proceeding with cleaning. Only use special cleaners to avoid damaging the aluminum plate. Use a special cleanser to clean the metal plate (15). Follow the instructions on the product label of the cleanser.
en After Sales Service No one is better placed to care for your Hotpoint product during the course of its working life than us – the manufacturer. Essential Contact Information DISPOSAL OF OLD ELECTRICAL APPLIANCES The European Directive 2012/19/UE on Waste Electrical and Electronic Equipment (WEEE), requires that old hou- Advice Line sehold electrical appliances must not be disposed of in the We have a dedicated team who can provide free advice and assistance normal unsorted municipal waste stream.
en TROUBLESHOOTING Problem Possible causes / Solutions Steam mop does not switch on • • • Steam mop can not generate steam • • • Check whether the plug is securely plugged into the electrical socket or not. Check your fuse or breaker. Check if the led is on. Check whether there is water into the water tank. The steam temperature is not enough high. After plugging in, wait 20 sec to heat up. The steam rate is controlled by the movement frequency. Try to move the product a little faster on the floor.
en hotpoint.co.
www.indesitcompany.com Steam mop UK 10/2014 - ver. 3.