EN Operating Instructions
10 21 7 22 23 24 25 6 26 9 11 13 8 12 27 5 4 29 28 14 15 3 16 17 30 19 37 36 35 2 1 20 34 2 18 31-32 33 41 42 43 38 40 39 40 SL D10 BPB UK | SL D10 BAB UK | SL D07 BEB UK 44
A B D F G C E
H I J K
L M N O P q R S t
en Description of the vacuum cleaner 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22.
en • • • • • • • • • The equipment was designed for household and similar uses such as in: • - staff kitchen areas in shops, offices and other work environments; • - farm houses; • - hotels, motels and other residential environments by the guests; • - bed&breakfast-type environments. Supervise children to prevent them from playing with the appliance. Turn unit off and unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
en batteries supplied (see paragraph “Remote Power Control” under chapter “Features”). USING THE VACUUM CLEANER (A) The appliance is equipped with a safety device that prevents the dust-compartment lid from closing unless the dust bag has been correctly installed. Do not force the dust bag lid to close and make sure all the parts are in the correct position to allow you to close the lid.
en Dual System (F) The Trolley Dual Clean (if available) version of the Trolley Power makes your use of the appliance extremely versatile because it can be used with or without dust bag. Just assemble the conversion kit in the package: it comprises a Pure Clean dust bag (36), dust bag support (35), gasket (39), and motor filter grill (38) already fitted to the motor filter (37). The assembling takes place as follows: 1. Make sure the appliance is disconnected from the electrical outlet. 2.
en the correct position to allow lid closure. 3. Cleaning the filters (I) version with dust bag 4. The Pure Clean Hepa 13 filter ensures maximum protection against allergens and maintains high air quality, as the air given back by the appliance is entirely free from dust/ powder residues (filtering power > 99.95 %). To clean the Pure Clean Hepa 13 filter (31): 1. Disassemble the air grill (33) using the opening tab. 2. Remove the Pure Clean Hepa 13 filter by releasing the opening tab. 3.
en 16. Fit the pre-filter into the special indentation of the Pure Clean Hepa 13 filter, locking both filters in place using the protection grill. 17. Fit the pre-filter, Pure Clean Hepa 13 filter and protection grille assembly onto the dust container, paying attention to the positions of the notches, until it clicks into place. 18. Re-place the dust container into the dust compartment. 19. Close the dust compartment lid until it clicks into place.
en Guarantee 12 months Parts and Labour Guarantee Please note: Our advisors will require the following information: This certificate of guarantee represents the guarantee (“Guarantee” hereinafter) offered by Indesit Company UK Limited with registered office at Peterborough PE2 9JB in relation to products purchased in the United Kingdom and Indesit Ireland Limited with registered office in Dublin 9, Ireland for products purchased in the Republic of Ireland.
en Troubleshooting Problem The vacuum cleaner cannot be switched on. The full dust bag/container indicator lights up although it is not full yet. Possible causes / Solutions • The plug was not inserted or is not making contact. • Change the dust bag. If large quantities of very fine dust/powder are sucked up (e.g. flour, etc), the full dust bag indicator may light up although the bag is not full yet.
en Commission delegated regulation (EU) No 665/2013 Brand Hotpoint Hotpoint Hotpoint Model SL D10 BPB UK SL D10 BAB UK SL D07 BEB UK Energy efficiency class C C A Annual energy consumption in kWh/year, rounded to one decimal place (1) 36 36 25,5 Carpet cleaning performance class D D E Hard floor cleaning performance class B B C Dust re-emission class B B B Sound power level in db(A) 80 80 78 Rated input power in W 1000 1000 700 (1) Indicative annual energy consumption (kW
en 15
www.hotpoint.co.uk Trolley Power Dual UK 2014/07 ver. 3.