5019_102_00270_INSTAL_GB 6-11-2007 10:45 Pagina 1 KRWS 9010 Assembly instructions
5019_102_00270_INSTAL_GB 6-11-2007 10:45 Pagina 2
5019_102_00270_INSTAL_GB 6-11-2007 10:45 Pagina 3 Installation kit supplied 4 Wine drawer overall dimension 5 Installation kit 6 Preparation of the cabinet for inserting the wine drawer 8 Fitting the two brackets supplied in the installation kit 9, 10 Inserting the wine drawer in the cabinet 13 Inserting the corrugated plastic sheet covering 16 Installation completed 17
5019_102_00270_INSTAL_GB 6-11-2007 10:45 Pagina 4 Installation kit supplied The wine drawer is designed for built-in installation and must not be used as a free-standing unit. Installation and maintenance must be carried out by at least two qualified technicians. INSTALL THE WINE DRAWER ONLY IN POSITION UNDER THE KITCHEN WORKTOP. Make sure the wine drawer is fixed to the adjacent cabinet with the brackets supplied. DO NOT INSTALL THE WINE DRAWER IN A COLUMN.
6-11-2007 10:45 Pagina 5 Wine drawer overall dimension 5019_102_00270_INSTAL_GB 5
SCALE 1:1 N° 14 SCREW 4.8x15 UNI 6955-71 AB N° 6 SCREW 4.
5019_102_00270_INSTAL_GB 6-11-2007 10:45 Pagina 7 7
SECTION F-F SCALE 1:1 CHAMFER 014x3.6 100 100 550 MIN. 50 MIN. 100 F 100 316 MIN. 81.5 10:45 VERT. 16 MIN. F VERT.-VERT. SECTION 6-11-2007 16 MIN. VERT. 680 MIN.
VERT.-VERT SECTION 10:45 316 MIN. 60 6-11-2007 VERT. VERT. Fitting the two brackets supplied in the installation kit 5019_102_00270_INSTAL_GB Pagina 9 9 340 MAX.
6-11-2007 10:45 BRACKET N° 10 SELF-TAPPING SCREWS 4.
6-11-2007 10:45 Pagina 11 SCALE 29:200 SCALE 29:200 N° 2 SIDE ADHESIVE 5019_102_00270_INSTAL_GB 11
897 354 MIN. DETAIL X SCALE 1:1 10:45 SEE DETAIL Y DETAIL Y SCALE 1:1 SEE DETAIL X VERT.-VERT. SECTION 6-11-2007 VERT. VERT.
N° 6 SCREWS UNI 6954-7IB 4.2x13 MIN.
TEMPLATE DETAIL X SCALE 1:2 10:45 14 2. THEN FIX THE WINE DRAWER TO THE CABINET WITH THE SCREWS SUPPLIED. 6-11-2007 1. INSERT THE WINE DRAWER IN THE CABINET POSITIONING IT SO THAT THE DRAWER SEAL EDGE IS 44 mm. FROM THE FRONT SIDE OF THE CABINET USING THE SPECIAL TEMPLATE SUPPLIED.
SCALE 33:200 B1 B3 B4 15 B 1 2 2 2 2 3 4 10:45 A 704 716 717 720 722 728 850 REPARATION OF THE CORRUGATED PLASTIC SHEET COVERING SUPPLIED IN THE INSTALLATION KIT 6-11-2007 SCALE 33:200 B2 CUT AND BEND 5019_102_00270_INSTAL_GB Pagina 15
6-11-2007 10:45 4 SCREWS 4.
6-11-2007 10:45 Pagina 17 Installation completed 5019_102_00270_INSTAL_GB 17
5019_102_00270_INSTAL_GB 6-11-2007 10:45 Pagina 18
5019_102_00270_INSTAL_GB 6-11-2007 10:45 Pagina 19
5019_102_00270_INSTAL_GB Printed in Italy 11/07 5019 102 00270 6-11-2007 10:45 Pagina 20 n GB