Service Manual

COMMERCIAL LAUNDRY

Air Dome Pressure Sensor Pulling Loose / Cracking

Models

MHN33

CHW9150 / 9160

MHN30

CET9000 / 9100

MLE / MLG22

CGT9000 / 9100

MLE / MLG20

Description

During some severe unbalance occurences, the hose attached to the pressure

sensor may chaffe where it is zip tied to the machine (MHN30 and MLE /

MLG20). On other machines, the hose may pull off of or crack the nipple of the

pressure transducer (MHN33 and MLE / MLG22).

Production Correction

The hose has been lengthened by approximately 7 inches and is now routed

through the internal, grey clip on the back, right corner of the cabinet. This

entered production with serial number C81660000 in late April. The new hose

can be ordered as a service part (W11252474).

® Registered trademark of Whirlpool, U.S.A., KitchenAid, U.S.A., Jenn-Air, U.S.A., or Maytag Properties, LLC or its related companies.