Whirlpool Corporation ▪ 2000 M-63 ▪ Benton Harbor, MI 49022 Bluetooth Sensor Module ALTCHBSM01 (FCC ID: A5UALTCHBSM01) USER GUIDE Rev 1.
Whirlpool Corporation ▪ 2000 M-63 ▪ Benton Harbor, MI 49022 Contents Introduction 3 Purpose and scope 3 Revision History 3 Module Overview 4 Module Application 4 Major Part Details for the PCB 5 Compliance Limits 5 Module Features and Operation 5 FCC Compliance Notices 5 OEM Responsibilities to comply with FCC Regulations 6 End Product Labelling 6 Contact Detail Rev 1.
Whirlpool Corporation ▪ 2000 M-63 ▪ Benton Harbor, MI 49022 1 1.1 Introduction Purpose and scope The purpose of this document is to provide details regarding the use of the Bluetooth Sensor Module. This document also describes the application and operation of it. Moreover, it declares the FCC compliance notices, too. 1.2 Revision History Date 2-21-2020 2-21-2020 Rev 1.0 Change Description Release to Altran Updated FCC ID and communication standard statement Page 3 Revision 1.0 1.
Whirlpool Corporation ▪ 2000 M-63 ▪ Benton Harbor, MI 49022 2 Module Overview 2.1 Module Application The Bluetooth Sensor Module is the platform which will be used across different applications based on an nRF52 Bluetooth Radio and XR871 sensor capture microcontroller. The Bluetooth Sensor Module is a Bluetooth ® 5, 2.4 GHz transceiver, utilizing BLE 2Mbit mode. It captures data using an attached sensor and transmits them over bluetooth.
Whirlpool Corporation ▪ 2000 M-63 ▪ Benton Harbor, MI 49022 2.2 Major Part Details for the PCB The Bluetooth Sensor Module consists of the following major components: - nRF52840 XR871 SPI NOR Flash Module DC-DC Boost Converter Ambient Light Sensor PIR - Passive Infrared Sensor Onboard Chip Antenna Connector for attaching sensor flex cable. Solder points for battery power source wires. 2.
Whirlpool Corporation ▪ 2000 M-63 ▪ Benton Harbor, MI 49022 2.4 Module Features and Operation The Bluetooth Sensor Module intended to operate with 2 x AA batteries (nominal 1.5V) attached to onboard boost power supply of typical voltage 3.3VDC. 3 FCC Compliance Notices FCC ID: A5UALTCHBSM01 This rebel module complies with Part 15 of the FCC Rules. The Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2.
Whirlpool Corporation ▪ 2000 M-63 ▪ Benton Harbor, MI 49022 • • • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. The SAR statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
Whirlpool Corporation ▪ 2000 M-63 ▪ Benton Harbor, MI 49022 information to the end user regarding how to install or remove this RF module or change RF related parameters in the user manual of the end product. 4 Contact Detail Whirlpool Corporation 2000 M-63 Benton Harbor, MI 49022 Phone: 1-269-923-6071 Rev 1.
Instructions to the OEM/Integrator: This module has been granted modular approval for mobile applications. OEM integrators for host products may use the module in their final products without additional FCC certification if they meet the following conditions. Otherwise, Additional FCC approvals must be obtained. The OEM must comply with the FCC labeling requirements.