7485 00 AKG668 Inst.
17485 00 AKG668 Inst.
17485 00 AKG668 Inst. Book 7/10/05 11:25 am Page 3 AKG668 Installation & Instructions for Use CONTENTS SUBJECT PAGE No.
17485 00 AKG668 Inst. Book 7/10/05 11:25 am Page 4 AKG668 Installation & Instructions for Use Congratulations on the purchase of your new Whirlpool Built-ln double oven and grill, from the World’s Largest Major Appliance Manufacturer. This appliance represents the latest in design and function. For this reason it is suggested that this instruction book is read thoroughly before attempting to use the oven for the first time, and then kept in a safe place for future reference.
17485 00 AKG668 Inst. Book 7/10/05 11:25 am Page 5 AKG668 Installation & Instructions for Use INSTALLATION SITING THE OVEN The AKG668 is designed to be installed either into a housing unit, or between base units. As the colours of the wires in the mains lead you may use to connect this appliance may not correspond with the markings on the terminals, please proceed as follows. ELECTRICAL CONNECTION The appliance must be installed by a competent electrician and connected to l.E.E.
17485 00 AKG668 Inst. Book 7/10/05 11:25 am Page 6 AKG668 Installation & Instructions for Use CLEANING ALL parts of the oven can be safely cleaned with a clean cloth wrung out in hot soapy water but let the oven cool before cleaning. To avoid damaging the surfaces when removing stubborn marks, we recommend the following: PAINTED PARTS (Door frame, Door handle, Outer frame trim) ONLY use a clean cloth wrung out in hot soapy water.
17485 00 AKG668 Inst. Book 7/10/05 11:25 am Page 7 AKG668 Installation & Instructions for Use SELF CLEAN SURFACES (Oven compartment) MOST TYPES OF CLEANING AGENT WILL DAMAGE THESE SURFACES. Only use a few drops of washing up liquid in hot water. Wipe the surfaces with a clean cloth wrung out in the hot soapy water, or when large splashes of fat do not readily disappear scrub the area with a nylon brush or nylon pan scourer, rinse well and heat the oven to dry the linings.
17485 00 AKG668 Inst. Book 7/10/05 11:25 am Page 8 AKG668 Installation & Instructions for Use HOW TO USE THE PROGRAMMER / CLOCK FUNCTIONS Cooking duration, cooking end time, time of day, minute minder up to 23 hours 59 minutes. DISPLAYS A = Automatic programme Cookpot symbol = Duration and manual mode Bell symbol = Minute minder 5. Set the main oven to SWITCH ON and OFF for delayed cooking. ie. fully automatic.
17485 00 AKG668 Inst. Book 7/10/05 11:25 am Page 9 AKG668 Installation & Instructions for Use 1. SET THE TIME OF DAY Select time of day function by pressing duration and end time button simultaneously and set time of day with the plus (+) and minus (-) buttons. Any programme which has been set is cancelled. 4. SEMI AUTOMATIC WITH COOKING END TIME Press cooking end time button and set required end time with the plus (+) and minus (-) buttons. The “A” and “Cookpot” symbols are illuminated.
17485 00 AKG668 Inst. Book 7/10/05 11:25 am Page 10 AKG668 Installation & Instructions for Use SETTING ERROR The setting is incorrect if the time of day is in between the calculated cooking time and end times. This will be indicated by an audible signal and by the flashing “A” symbol. The faulty setting can be corrected by re-setting either cook time or end time.
17485 00 AKG668 Inst. Book 7/10/05 11:25 am Page 11 AKG668 Installation & Instructions for Use AUTOMATIC COOKING IN MAIN OVEN The automatic cooking facility is controlled by the programmer (See Pages 6 to 8) and allows complete meals, or individual dishes, to be cooked while you are out of the house, to be ready when you return. NOTE: The “READY TIME” should be set as close as possible to, or just after your anticipated return, so food is not left standing in a warm oven. DO 1.
17485 00 AKG668 Inst. Book 7/10/05 11:25 am Page 12 AKG668 Installation & Instructions for Use 5. NEVER leave food in the oven to cool slowly after cooking, serve immediately or refrigerate. 6. NEVER use the automatic facility to reheat cook chill foods, as they should go straight from the refrigerator into a preheated oven. Meat can be brushed with oil to prevent it from drying.
17485 00 AKG668 Inst. Book 7/10/05 11:25 am Page 13 AKG668 Installation & Instructions for Use FAN ASSISTED MAIN OVEN If you are used to cooking with a conventional oven you will find a number of differences to cooking with a fan oven which will require a different approach. temperatures may have to be reduced, and the following chart will give you a guide.
17485 00 AKG668 Inst. Book 7/10/05 11:25 am Page 14 AKG668 Installation & Instructions for Use The fan comes on when the oven is switched on, and circulates the air around the oven to give a fairly even temperature throughout the oven. This makes it ideal for batch baking as all the items will be cooked within the same length of time. To help the air circulate freely: (i) Position the shelves evenly within the oven and maintain a clearance from the oven roof and base.
17485 00 AKG668 Inst. Book 7/10/05 11:25 am Page 15 AKG668 Installation & Instructions for Use AUTOMATIC OPERATION See programmer section on page 6. NOTE: When the oven is switched on, you will hear the cooling fan come on, this keeps the exterior of the appliance cool during cooking, and will continue to operate to cool the appliance for up to 15 minutes after the last control has been switched off. to 15 minutes depending on the temperature selected.
17485 00 AKG668 Inst. Book 7/10/05 11:25 am Page 16 AKG668 Installation & Instructions for Use BAKING GUIDE Temperature OC Cooking Time (Approx.
485 00 AKG668 Inst. Book 7/10/05 11:25 am Page 17 AKG668 Installation & Instructions for Use SLOW COOKING, DEFROSTING AND COOLING Make sure that frozen foods are thoroughly THAWED before cooking. SAFETY NOTES: DO NOT defrost stuffed poultry using this method. DO NOT defrost larger joints of meat or poultry over 2kg (41b), using this method. NEVER place uncooked food which is to be defrosted next to cooked food which is to be cooled, as this can lead to contamination .
17485 00 AKG668 Inst. Book 7/10/05 11:25 am Page 18 AKG668 Installation & Instructions for Use ROASTING GUIDE Type of Meat BEEF LAMB Preference Approximate Cooking Time Rare 20 mins per 450g (1lb) plus 20 mins. Medium 25 mins per 450g (1lb) plus 25 mins. Well Done 30 mins per 450g (1lb) plus 30 mins. Medium 25 mins per 450g (1lb) plus 25 mins. Well Done 25 mins per 450g (1lb) plus 25 mins. PORK 35 mins per 450g (1lb) plus 35 mins. FOWL 20 mins per 450g (1lb) plus 20 mins.
17485 00 AKG668 Inst. Book 7/10/05 11:25 am Page 19 AKG668 Installation & Instructions for Use USING THE GRILL 1. Turn the top oven selector fully clockwise past the oven temperature markings to the grill setting. 2. Then turn the grill control on. IMPORTANT: The door must be open when the grill is used.
17485 00 AKG668 Inst. Book 7/10/05 11:25 am Page 20 AKG668 Installation & Instructions for Use TOP OVEN SAFETY WHEN YOU ARE COOKING KEEP CHILDREN AWAY FROM THE VICINITY OF THE OVEN. MANUAL OPERATION Turn the top oven control knob to the selected temperature. The red thermostat indicator will come on until the selected temperature is reached and then go off, it will turn on and off periodically as the thermostat operates to maintain the selected temperature.
17485 00 AKG668 Inst. Book 7/10/05 11:25 am Page 21 AKG668 Installation & Instructions for Use COOKING TEMPERATURES Because the top oven is more compact it may be necessary to reduce cooking temperatures specified in recipes by up to 20°C. Use the following guide as a reference for determining temperatures to use.
17485 00 AKG668 Inst. Book 7/10/05 11:25 am Page 22 AKG668 Installation & Instructions for Use BAKING GUIDE FOR TOP OVEN Item(s) to be baked Temperature Shelf O C Position Cooking Time (Approx.
17485 00 AKG668 Inst.
17485 00 AKG668 Inst. Book 7/10/05 11:25 am Page 24 AKG668 Installation & Instructions for Use BEFORE YOU START INSTALLATION INSTRUCTIONS This appliance is designed for installing ONLY at a low level, ie. under a worktop, and it should not be installed at a high level. There are three methods for installing the AKG668. METHOD 1 Into a space between two base units, i.e. WITHOUT a housing unit.
17485 00 AKG668 Inst. Book 7/10/05 11:25 am Page 25 AKG668 Installation & Instructions for Use INSTALLATION METHOD 1 METHOD 1Without housing unit (Between 2 base units) BEFORE installing the appliance, check the internal dimensions as shown in the illustration. The space for the appliance must be clear of obstructions, and there must be enough space at the back of the oven to obtain the 550mm minimum depth. The FIXING KIT is packed onto the oven under the polystyrene packaging.
17485 00 AKG668 Inst. Book 7/10/05 11:25 am Page 26 AKG668 Installation & Instructions for Use SECURING APPLIANCE INTO POSITION 1. To ensure the outer frame trim is not damaged by the drill, remove it from the appliance before drilling the side trims. 2. Make sure the appliance is CENTRALLY located between the base units. 3. Open the grill door and you will see the 2 fixing holes at the top sides of the front frame. 4. Drill through the fixing holes into the side trims with a 3.
17485 00 AKG668 Inst. Book 7/10/05 11:25 am Page 27 AKG668 Installation & Instructions for Use METHOD 2 Housing unit (internal height less than 710mm) NOTE: This ensures a 5mm to 8mm clearance from the underside of the worktop to the top of the appliance. 2. Measure 50mm from the front edges of the base unit, to mark the front edge for the runners. 3. Take 6 of the No.8 x 12mm (Black) chipboard screws and screw the runners into position the RIGHT WAY up as shown. 4.
17485 00 AKG668 Inst. Book 7/10/05 11:25 am Page 28 AKG668 Installation & Instructions for Use Min.
17485 00 AKG668 Inst. Book 7/10/05 11:25 am Page 29 AKG668 Installation & Instructions for Use METHOD 3. Housing unit (Internal height 710mm or more. When installed in a typical 600mm deep, built in housing unit, the false back should be removed from the housing unit to provide the necessary depth for installation. When the false back is removed, it is normally the case that the support shelf for the appliance leaves a gap between the back edge of the support shelf and the wall of approximately 80mm.
17485 00 AKG668 Inst. Book 7/10/05 11:25 am Page 30 AKG668 Installation & Instructions for Use If no gap occurs between back edge of the shelf and wall behind the unit, recommended that a gap of LEAST 30mm is made shortening the shelf. the the we AT by FRONT OF OVEN INSERT THE APPLIANCE AND SECURE INTO POSITION Open the grill door and secure appliance into position, using the 2 No.8 x 25mm (Silver) chipboard screws through the front frame, ensuring that the appliance is centrally located.
17485 00 AKG668 Inst.
17485 00 AKG668 Inst.
