INSTRUCTION FOR USE - ACM 702 ENGLISH 210 mm 145 mm 145 mm 180 mm Instructions for use Page 2 5019 319 01515
IMPORTANT SAFETY INFORMATION This manual contains important information regarding safety, the use and maintenance of your new hob. Read the manual carefully and keep it in an easily accessible place for future consultation. Precautions and Advice 10. 1. CAUTION: This cooktop complies with all applicable safety and electromagnetic compatibility legislation. However, individuals fitted with a heart pacemaker should maintain a safe distance from the appliance.
INSTALLATION and ELECTRICAL CONNECTION The power supply cable must be long enough to allow the hob to be removed from the worktop and must be positioned so as to avoid damage or overheating caused by contact with the base of the hob itself. Do not use extension leads. Installation must be carried out by a qualified electrician who is fully aware of current safety and installation regulations.
Installation and fixing The worktop must be -20 50mm thick. If necessary, cut the kitchen unit and worktop to fit before installing the hob. Clean the cutout of any chips that could compromise appliance operation. The installer is responsible for any damage or injury resulting from incorrect installation. To guarantee correct operation, the appliance must be installed on a perfectly flat surface. For cut-out dimensions, see the figure below.
A fig. 3 fig. 4 Undercounter oven installation: • If an oven (which must be of our manufacture) is to be installed under the hob, ensure it is equipped with a cooling system and observe the distances given in the figure to the side. • There must be nothing between the cooktop and the oven (cross rails, panels, brackets, etc.). 5 mm OPERATING INSTRUCTIONS Control panel Timer On/Off Child safety the symbols are not active! To select the desired functions, touch the areas below.
Switching on and adjusting cooking zones Heat setting indicator Button Cooking zone positioning Button + Selected cooking zone indicator Fast boil function (Booster) After switching on the hob and positioning the pot on the chosen cooking zone, adjust the heat setting using the button +. When switched on, the display shows level 5. Each cooking zone has different heat settings that can be adjusted using the buttons +/-, which go from “1”: min. heat setting to “9”: max. heat setting.
MAINTENANCE Care and maintenance To clean the hob, proceed as follows: 1. use a soft clean cloth, absorbent kitchen wipes or a proprietary cleaner for glass ceramic hobs. Do not use abrasive sponges and/or metal scouring pads. 2. Food spills should be cleaned off before they bake onto the glass ceramic surface. Sugar and foods with a high sugar content damage the glass ceramic surface and must be immediately removed using a scraper for glass.
Failure to comply with these instructions may compromise the safety and quality of the product. Appliance data plate MODEL SERIALNUMBER BRAND USER ADVICE Energy saving tips • The symbol on the appliance, or on documentation enclosed with the appliance, indicates that this product must not be treated as household waste, but must be delivered to the nearest collection centre for the recycling of electrical and electronic appliances.
