AIR CONDITIONER For questions about features, operation/performance, parts, accessories or service, call: 1-800-253-1301 in the U.S.A. ACONDICIONADOR Si tiene prsguntas respeeto alas caractsrfstisas, funsionamiento, rendimiento, partes, ascssorios o servisio teenico, Ilame al: 1-800-253-1301 en los EE. UU. Table of Contents/Indice 1188080A .....................................
TABLEOF CONTENTS AIR CONDITIONER SAFETY ......................................................... INSTALLATION REQUIREMENTS ................................................ Tools and Parts ............................................................................ 2 3 3 Location Requirements ................................................................ Electrical Requirements ............................................................... INSTALLATION INSTRUCTIONS .....................................
IMPORTANT SAFETY INSTRUCTIONS WARN I NG: To reduce the risk of fire, electrical shock or injury when using your air conditioner, follow these basic precautions: • Plug into a grounded • • 3 prong outlet. • Do not use an extension cord. Do not remove ground prong. [] Unplug air conditioner Do not use an adapter. • Use two or more people to move and install air conditioner. before servicing.
Through-the-wall Power supply cord installation Wiring requirements ® The wail opening measurements should be: • Height: 16" (40.6 cm) plus twice the thickness of wood used to build frame. • Width: 22%" (57.5 cm) plus twice the thickness of wood used to build frame. • Depth: 21/2'' (6.4 cm) minimum to 8" (20.3 cm) maximum. I • 1/4" © B Recommended C C. Wood thickness D. 2_" (6.4 cm) minimum to 8" (20.
To test your power supply cord: 1. Plug power supply cord into a grounded 3 prong outlet. 2. Press RESET. 3. Press TEST (listen for click; Reset button will trip and pop out). 4. Electrical Shock Hazard Press and release RESET (listen for click; Reset button will latch and remain in). The power supply cord is ready for operation. NOTES: Plug into a grounded 3 prong outlet. • The Reset button must be pushed in for proper operation. Do not remove ground prong.
NOTE: Handle airconditioner gently. 5= Window installation (on some models) NOTE: Attach top channel and side curtains to air conditioner cabinet before placing cabinet in window. 1. Locate supplied bag of screws. 2. Place top channel on top of air conditioner cabinet, lining up the 3 holes in top channel with the 3 holes on top of air conditioner cabinet. 3. Using 3 - #10 - 12 x %" pan-head Phillips screws, attach top channel to air conditioner cabinet.
Option 2--Plastered wall with no molding If the plastered wall is to be flush with the cabinet and no molding is used, the wood frame must be set 1/2"(13 ram) into the inside wall. AB 3. C A. Plastered wall B. Inside wall Cut opening through the wall. Remove and save insulation. NOTES: • Dimension for depth depends on wall thickness and type of molding. • Do not block louvers in air conditioner • Use 1" (2.5 cm) or thicker lumber for wood frame. C. Wood frame D. Louvers A. Outside width 1.
6= Insert one of the #8 x 3/4"round-head screws through hole and into lower window sash. Insert one of the #6 - 32 x 1/4"pan-head screws through threaded hole in top of curtain. A B 2. Use a level to check that cabinet is level side to side. 3. Check that air conditioner cabinet is tilted to the outside so that water will run to the outside, 4. Reuse the insulation to seal opening between cabinet and frame. 5.
4. Install foam seal in the gap between air conditioner base and cabinet. Push foam seal in at the sides and trim any excess material. Electrical Shock Hazard Plug into a grounded Do not remove 3 prong outlet. ground prong. Do not use an adapter. A. Foam seal Do not use an extension cord. 5. Remove the 2 front panel screws from air conditioner base. 6. Insert front tabs of front panel into top of cabinet and swing front into place. 7. Attach bottom front of panel with front panel screws.
Exhaust Control (on some models) Style 2--Heat/Cool models) Set the Exhaust control to CLOSED for maximum continuous cooling. The Exhaust control set OPEN allows you to draw stale or smoky air from the room. • OPEN--to exhaust room air to the outside • CLOSED--to circulate room air CLOSED Style 1 --Cool only air conditioner Settings (on some Fan Control Set the Fan control to the desired setting.
Mo mcl !xx ;Os Cb_"ss_"°_s_ _' Ay I,}_'_,SCO t Use the tabs to direct the air right or left (on some models). Rotate the whole cartridge to direct air up, down or straight ahead. When your air conditioner sounds such as: is operating normally, you may hear • Droplets of water hitting the condenser, causing a pinging or clicking sound. The water droplets help cool the condenser. • Air movement from the fan. • Clicks from the thermostat • Vibrations or noise due to poor wall or window construction.
TROUBLESHOOTING Before calling for service, try the suggestions below to see whether you can solve your problem without outside help. The air conditioner is in a heavily occupied room, or heatproducing appliances are in use in the room. Use exhaust vent fans while cooking or bathing and try not to use heatproducing appliances during the hottest part of the day. A higher capacity air conditioner may be required, depending on the size of the room being cooled.
ASSISTANCEOR SERVICE To avoid unnecessary service calls, please check the "Troubleshooting" section. It may save you the cost of a service call. If you still need help, follow the instructions below. If you need assistance or service Please record your model's information. Whenever you call to request service on your appliance, you need to know your complete model number and serial number. You can find this information on the model and serial number label.
SEGURIDADDELACONDICIONADOR DEAIRE Su seguridad Hemos incluido Lea y obedezca y la seguridad de los demas muchos mensajes importantes de seguridad siempre todos los mensajes de seguridad. Este sfmbolo le llama la atenci6n lesi6n a usted y a los demas. Este eslos el mensajes sfmbolo dedeadvertencia Todos seguridad y de la palabra "PELIGRO" es muy importante. en este manual sobre peligros potenciales yen su electrodomestico. que pueden ocasionar de seguridad.
Piezas suministradas (en algunos modelos) Verifique que esten todas las piezas en el paquete de piezas. Instalacibn en la ventana (en algunos modelos) Medidas de la abertura de la ventana: C D E • Ancho: 27" (68,6 cm) m(nimo a 40" (101,6 cm) maximo • Altura: 161/4'' (41,3 cm) mfnimo F A. Obturadores de espuma (2) B. Soporte de seguridad para la ventana C. Temilles de cabeza de cone achatado #6 - 32 x _" (2) D. Tomillos de cabeza redonda #8 x ¾" (3) E.
M_todo recomendado para la puesta a tierra Peligro de Cheque Electrico Conecte a un contacto de pared de cone×ion a tierra de 3 terminales. No quite la terminal de cone×ion a tierra. No use un adaptador. No use un cable electrico de extensi6n. No eeguir estae inetruccionee puede ocaeionar la rnuerte, incendio e cheque electrico.
2. Presione RESET (Reposici6n), 3. Presione TEST (Prueba) (escuche el chasquido, reposici6n se atrapa y salta). 4. Presione y suelte RESET (escuche el chasquido, el bot6n de reposici6n queda asegurado y se mantiene asegurado). El cable de suministro de energia esta listo para su funcionamiento. el bot6n de NOTAS: Peligro de Cheque Electrico Cenecte a un contacto de pared de cone×ion a tierra de 3 terminales.
6. Tire de la manija para deslizar el acondicionador de aire fuera del gabinete. Coloque el acondicionador de aire sobre el cart6n. Vista posterior A B A. Alojamiento de la cortina B. Gufas para las cortinas Vista inferior A. Manija NOTA: No levante, empuje, jale ni remueva ningQn poliestireno expandido (espuma) del interior del acondicionador de aire. No es un material de empaque. NOTA: Trate el aeendicionader de aire con euidado. B A. Alojamiento de la cortina B.
No bloquee las rejillas que estan en el gabinete del acondicionador de mire. Instalacibn a trav_sdelapared Utilice madera de 1" (2,5 cm) o mas gruesa para el marco de madera. NOTAS: • Es responsabilidad y obligaci6n del cliente hacer que este producto sea instalado por un tecnico calificado familiarizado con instalaciones a traves de la pared de acondicionadores de mire de habitaciones.
4. Verifique que el gabinete del acondicionador de aire este inclinado hacia afuera para que el agua corra hacia el exterior. 5. Tire de la cortina izquierda hacia afuera hasta que encaje en el canal de la ventana. Utilice una broca de barrena de %2" para taladrar un primer orificio en el alojamiento de la cortina y dentro del marco inferior de ia ventana. 11.
NOTA: Trate el acondicionador 1. de aire con cuidado. AsegQrese de que el extremo libre del alambre a tierra este fuera del gabinete. 5. Quite los dos tornillos del panel delantero de la base del acondicionador de aire. 6. Inserte las leng0etas frontales del panel delantero en la parte superior del gabinete y oscile el frente para colocarlo en su lugar. 7. Fije el frente inferior del panel con los tornillos del panel delantero. Vuelva a colocar las perillas de control (en algunos modelos).
COMO USARSUACONDICIONADOR DE AIRE Operar debidamente su acondicionador de aire le permite obtener los mejores resultados posibles. Esta secci6n le explica c6mo operar su acondicionador debidamente. No trate de operar su acondicionador de aire en el modo de enfriamiento cuando la temperatura exterior sea menor de 65°F (18°C). El serpentin interior del evaporador se congelara y el acondicionador de aire no funcionara debidamente.
Fan Only--para enfriarse que el aire circule continuamente sin NOTA: El ventilador funciona en velocidad Turbo solamente. Power Saver (Ahorro de energia)--el ventilador funciona Qnicamente cuando se necesita enfriamiento. Debido a que el ventilador no hace aire de la sala, se consume menos sala circula con menos frecuencia. Saver cuando este fuera del hogar Use la lengQetas para dirigir el aire hacia la derecha, o hacia la izquierda (en algunos modelos).
CUIDADO DESUACONDICIONADOR DEAIRE Su nuevo acondicionador de aire esta diser_ado para darle muchos aSos de servicio confiable. Esta secci6n le ofrece la informaci6n acerca de la limpieza adecuada y el cuidado de su acondicionador de aire. Llame al vendedor autorizado de su Iocalidad para un chequeo anual. Acu@dese...el precio de este servicio es su responsabilidad. El filtro de aire se puede desmontar para facilitar su lirnpieza.
El acondicionador de aire no tiene el tamaSo adecuado para su habitaci6n. Verifique la capacidad de enfriamiento de su acondicionador de aire para habitaci6n, Los acondicionadores de aire para habitaciones no estan diseSados para enfriar varias habitaciones. Elcabledesuministrodeenergiadelacondicionador de airesetraba(elbotbndereposicibnsalta) Las interrupciones en la corriente el_ctrica de su casa pueden hacer trabar (el bot6n de reposici6n saltara) el cable de suministro de energfa.
AYUDA O SERVICIOTECNICO Para evitar Ilamadas solicitando servicio innecesarias, revise la secci6n de "Solucidn de problemas". Podria ahorrarle el costo de una Ilamada solicitando servicio. Si aQn necesita ayuda, siga las instrucciones a continuaci6n. Si necesita ayuda o servicio t_cnico Por favor anote la informacibn sobre su modelo. Siempre que Ilame para solicitar servicio del aparato, necesitara saber el nt_mero del modelo y el nt_mero de serie completos.
1188080A ©2005. All rights reserved. Todos los derechos reservados. 5/05 Printed in U.S.A. Impreso en EE. UU.