5KSM7580X, 5KSM7591X, 5KPM5, 5KSM6521X W10648168A_ENv03.
W10648168A_ENv03.
English................................................................................. 5 Deutsch............................................................................. 00 Français............................................................................. 00 Italiano............................................................................... 00 Nederlands....................................................................... 00 Español.............................................................
W10648168A_ENv03.
STAND MIXER INSTRUCTIONS English TABLE OF CONTENTS STAND MIXER SAFETY Important safeguards........................................................................................... 6 Electrical requirements ...................................................................................... 7 Electrical equipment waste disposal.................................................................... 7 PARTS AND FEATURES.........................................................................................
STAND MIXER SAFETY S IMPORTANT SAFEGUARDS 6 When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. To avoid risk of electrical shock, do not put Stand Mixer in water or other liquid. 3.
KitchenAid may cause fire, electrical shock, or injury. 8. Do not use the Stand Mixer outdoors. 9. Do not let the cord hang over edge of table or counter. 10. Remove Flat Beater, Stainless Steel Whip, or Spiral Dough Hook from Stand Mixer before washing. 11. To avoid product damage, do not use the mixer bowls in areas of high heat such as an oven, microwave, or on a stovetop. 12. This product is designed for household use only.
PARTS AND FEATURES Motor head Speed control lever Attachment hub (see the “Attachments*” section) Attachment knob Beater height adjustment screw Bowl lift lever (not shown) Beater Shaft Bowl support Bowl handle* Locating pins Bowl* Dough hook* Flat beater* Wire whip* Pouring shield** Lid** 8 * Material, style, and size may differ depending on model. ** Pouring shield included only for models 5KPM5, 5KSM7580X and 5KSM7591X / Lid included only for models 5KPM5 and 5KSM6521X. W10648168A_ENv03.
* ASSEMBLING THE STAND MIXER English Attaching the bowl and beaters 1 Turn speed control to “0” (OFF), and unplug Stand Mixer. 2 Place bowl lift lever into down position. 4 Slip a beater (flat, wire whip, or dough hook) onto the beater shaft and press upward as far as possible. Turn beater to the right, hooking it over the pin on the beater shaft. 6 Raise the bowl into mixing position by rotating the bowl lift lever counterclockwise to the straight up position.
ASSEMBLING THE STAND MIXER Adjusting beater to bowl clearance Your Stand Mixer is adjusted at the factory so the flat beater just clears the bottom of the bowl. If, for any reason, the flat beater hits the bottom of the bowl or is too far away from the bowl, you can correct the clearance easily. 1 3 Turn speed control to “0” (OFF), and unplug Stand Mixer. Turn beater height adjustment screw (A) slightly counterclockwise (left) to raise the flat beater; or turn clockwise (right) to lower the flat beater.
OPERATING THE STAND MIXER Speed control guide - 10 speed Stand Mixers Speed Used for Accessories English All speeds have the Soft Start feature that automatically starts the Stand Mixer at a lower speed to help avoid ingredient splash-out and “flour puff” at start-up, then quickly increases to the selected speed for optimal performance. Description 1 Stirring For slow stirring, combining, mashing, starting all mixing procedures.
OPERATING THE STAND MIXER Removing the bowl and beaters 1 Turn speed control to “0” (OFF), and unplug Stand Mixer. 2 Lower the bowl to the down position. 3 Press the beater up as far as possible and turn left, then pull beater from the beater shaft. 4 Grasp the bowl handle and lift it straight up and off the locating pins.
TIPS FOR GREAT RESULTS Your KitchenAid Stand Mixer will mix faster and more thoroughly than most other electric mixers. Therefore, the mixing time in most recipes must be adjusted to avoid overbeating. To help determine the ideal mixing time, observe the batter or dough and mix only until it has the desired appearance described in your recipe, such as “smooth and creamy.” To select the best mixing speeds, use the “Speed control guide” section.
CARE AND CLEANING ELECTRICAL SHOCK HAZARD ALWAYS BE SURE TO UNPLUG MIXER BEFORE CLEANING TO AVOID POSSIBLE ELECTRICAL SHOCK. Wipe mixer with a damp cloth. DO NOT IMMERSE IN WATER. Wipe off beater shaft frequently, removing any residue that may accumulate. 2 The bowl, flat beater, and dough hook may be washed in a dishwasher. Or, clean them thoroughly in hot sudsy water and rinse completely before drying. Do not store beaters on shaft. 1 Always be sure to unplug Stand Mixer before cleaning.
TROUBLESHOOTING 3. If the Flat Beater hits the Bowl, stop the Stand Mixer. See the “Setting Up Your Stand Mixer” section. Please read the following before calling your service center. 1. T he Stand Mixer may warm up during use. Under heavy loads with extended mixing time periods, you may not be able to comfortably touch the top of the unit. This is normal.
WARRANTY AND SERVICE KitchenAid Stand Mixer warranty Length of Warranty: KitchenAid Will Pay KitchenAid Will Not For: Pay For: Europe, Middle East and Africa: For models 5KPM5, and 5KSM7591X: One year full warranty from date of purchase. For models 5KSM7580X, 5KSM6521X: Five years full warranty from date of purchase. The replacement parts and repair labor costs to correct defects in materials or workmanship. Service must be provided by an Authorized KitchenAid Service Center. A.
English 17 W10648168A_ENv03.