TM 1002FX / 1202FX OPERATING MANUAL AND USER GUIDE www.wharfedalepro.
OPERATING MANUAL AND USER GUIDE TABLE OF CONTENTS IMPORTANT WARNINGS & SAFETY INSTRUCTIONS....................................................2 INTRODUCTION................................................................................................................4 ABOUT THE CONNECT 1002FX/1202FX.........................................................................4 COMMON FEATURES.......................................................................................................
CONNECT 1002FX / 1202FX IMPORTANT WARNINGS & SAFETY INSTRUCTIONS 1. Read these instructions. 2. Follow all instructions. 3. Keep these instructions. 4. Heed all warnings. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
OPERATING MANUAL AND USER GUIDE ATTENTION: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR 19. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. Warning: To reduce the risk of electric shock, do not remove the cover (or back) as there are no user-serviceable parts inside.
CONNECT 1002FX / 1202FX INTRODUCTION Congratulations on the purchase of your Connect 1002FX/1202FX mixer. Connect 1002FX/ 1202FX mixers are the result of many years of experience in the use, design and manufacture of professional audio equipment. We take great pride in engineering and building every Wharfedale Pro product and wish to thank you for entrusting us with your sound.
OPERATING MANUAL AND USER GUIDE EFFECTS SECTION (FX Interface): You have a choice of 56 different effects, from Reverb to Flanging to Delay. You can send them to the main mix outputs. 1 2 3 4 5 1. Shows which of effect 2. Shows when the FX bus is overloaded 3. Turns the FX processor on or off 4. Selects the effect algorithm as listed below the control 5.
CONNECT 1002FX / 1202FX CONNECT 1002FX FEATURES • 2 Mono Mic/Line Channels and 8 Stereo Channels • Input Gain Controls On All Mono Channels • Studio grade phantom powered microphone pre-amps • Ultra musical 3 band EQ with high pass filters On All Mono Channels • Built-in digital FX with dedicated send, 56 effects • Pan or balance controls, Stereo 4 Segment LED Meters • Control room and headphone outputs, 2TK to Mains/ Headphones Level Control • Master outputs with TRS connectors, Clip LED on Mic/Line Chann
OPERATING MANUAL AND USER GUIDE MONO CHANNEL WALKTHROUGH 1 2 1. Balanced XLR input for connecting microphones 2. Balanced/Unbalanced TRS input for line level sources 3. 3 4 5 6 7 8 9 10 11 Gain control for calibrating sources and applying correct gain structure 4. High EQ centred at 12KHz 5. Mid EQ centred at 1KHz 6. Low EQ centred at 80Hz 7. Sends to the internal FX engine or to effect 8. HPF with 80Hz cutoff point 9. Used to spatially place the channel within the stereo field 10.
CONNECT 1002FX / 1202FX MASTER SECTION WALKTHROUGH 3 1 4 2 9 5 10 6 11 13 8 7 12 14 15 16 1. Balanced/unbalanced TRS main outputs 2. Used for control room monitoring, connect directly to your power amplifier or active speakers 3. For connecting FX send 4. For connecting headphones 5. 2-Track inputs for playback devices (⅛" jack takes priority) 6. 2-Track outputs for recording devices (⅛" jack takes priority) 7. Indicates +48v phantom power activity 8. Indicates AC power supply 9.
OPERATING MANUAL AND USER GUIDE REAR PANEL WALKTHROUGH 2 3 1 1. AC Supply input, use only the supplied Wharfedale Pro authorised power supply 2. Turns the Connect Mixer on or off 3. Switches the global +48V phantom power on or off WIRING DIAGRAM SIGNAL INPUT MIC,CD etc.
CONNECT 1002FX / 1202FX GUIDE CONNECT 1002FX DIMENSIONAL DRAWING 10
OPERATING MANUAL AND USER GUIDE GUIDE CONNECT 1202FX DIMENSIONAL DRAWING 11
CONNECT 1002FX / 1202FX CONNECT1002FX BLOCK DIAGRAM 12
OPERATING MANUAL AND USER GUIDE CONNECT1202FX BLOCK DIAGRAM &RQQHFW ); %ORFN VFK )UL $XJ 13
CONNECT 1002FX / 1202FX SPECIFICATIONS Model Connect 1002FX Maximum Balanced Main XLR Balanced out +26dBu ±1dBu Output Level (1%T.H.D. Main 1/4" Jack Balanced out +26dBu ±1dBu Connect 1202FX Main XLR Balanced out +26dBu ±1dBu Main 1/4" Jack Balanced out +26dBu ±1dBu at 1kHz ) Maximum Unbalanced Main XLR Unbalanced out +21dBu ±1dBu Main XLR Unbalanced out +21dBu ±1dBu Output Level (1%T.H.D.
WHARFEDALE PRO LIMITED WARRANTY Wharfedale Pro Connect Series products are warranted of manufacturing or material defects for a period of one year from the original date of purchase. In the event of malfunction, contact your authorized Wharfedale Pro dealer or distributor for information. *Be aware that warranty details may differ from country to country. Contact your dealers or distributor for information. These terms do not infringe your statutory rights.