Daim Ntawv Qhia Tus Neeg Siv

REAR INPUT CONTROLS
RCA inputs
Rear panel
volume control
High frequency
control
Low frequency
control
Balanced XLR input
and
balanced 6.3 mm input
MONITOR POSITIONING
The Diamond Studio monitors are a ‘bookshelf’ design and can be used on monitor stands or on a rigid bookshelf.
We suggest that they are positioned at least 200 mm from the rear walls and 700 mm from the side walls, facing
slightly inwards.
The bass extension will improve if they are positioned closer to the rear wall.
However, If the loudspeakers are placed too close to the walls, the bass will increase but may become boomy and
indistinct. If the loudspeakers are placed away from the walls, the inward angle may be increased by up to 40%,
although this may restrict the width of the optimum listening position.
A useful rule of thumb is that the listener should be as far from the loudspeakers as they are from each other.
The speakers should ideally be positioned so that the treble units are roughly at ear level to the seated listener.
As personal taste plays a large role, experiment with different configurations and play a wide range of programme
material before finalising the position of your speakers.
Diamond Studio series
QUICK START GUIDE
VOLUME
+10 dB
AC INPUT
POWER
ON
OFF
L R
AC 100 V-240 V ~50/60 Hz
140 W
FUSE T 2.5 AL 250 V
HF LEVEL (dB)
0
+1
-2
+2
LF LEVEL (dB)
0
+1
-2
+2
Congratulations on the purchase of your Diamond Studio studio monitor. We take great pride in engineering and building every
Wharfedale Pro product and wish to thank you for entrusting us with your audio.
From the time Gilbert Briggs built his first loudspeaker in 1932, to the present day, we have maintained the same standard of
quality in components, workmanship and performance.
Please take the time to read this guide completely in order to get the most from your new monitors.
Your full user manual can also be downloaded from www.wharfedalepro.com