MANUAL EN PIANO SHIELD FOR MICRO:BIT WPSH455 whadda.
Introduction To all residents of the European Union Important environmental information about this product This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling. This device should be returned to your distributor or to a local recycling service. Respect the local environmental rules.
Product overview This piano shield is the ideal musical companion for your Micro:Bit project! The shield features 13 touch sensitive piano keys spanning 1 full octave (including sharp/flat keys), a buzzer, and 4 RGB LEDs. It is super easy to connect your Micro:Bit to the shield, simply slot it into the provided card-edge connector, no screws or wires required! The shield also breaks out various pins and interfaces to screw connectors and pin headers including power, ground, P2, P8, SPI and I2C bus.
You can download the example micro:bit® program by going to the official Whadda github page: github.com/WhaddaMakers/piano-shield-microbit 1. Click the “Download ZIP” link in the “Code” menu: 2. Unzip the downloaded file. 3. Go to makecode.microbit.org and start a new project 4. Drag the example_code.hex file that is located in the folder you unzipped to the empty makecode blocks workspace. The sample code blocks should appear on your screen: 5. Upload the code to your micro:bit.
whadda.com Modifications and typographical errors reserved - © Velleman Group nv. WPSH455 Velleman Group NV, Legen Heirweg 33 - 9890 Gavere.