BM200 Datasheet BLE Pass‐through Module Bluetooth 5.0 version 02 2021/6/23 Whayu industrial co. ltd TEL: 03‐5714225 No.326, Sec. 2, Kung Tao 5 Road., Hsinchu City 30070, Taiwan (R.O.C.
BM200 Datasheet Table of Contents Table of Contents ........................................................................................................... 1 Revision History .............................................................................................................. 2 Related Documents ........................................................................................................ 2 Overview: ....................................................................................
BM200 Datasheet Revision History Date 2021/2/5 2021/6/23 2021/7/21 Release R01 Author LL/JW R02 LL/JW R03 LL/JW Description First released Add FCC Statement Related Documents Date Whayu Industrial Co., Ltd. Author Document(s) http://www.whayu.
BM200 Datasheet Overview: BM200 is Bluetooth 5.0 Low Energy serial pass‐through module based on ultra‐low‐ power Realtek RTL8762C SOC with built‐in high performance PCB antenna. Just simply connect BM200 module to MCU by using UART interface, focus on MCU firmware development and save time on BLE stack and hardware development, simple and neat. Feature Supports Bluetooth 5.
BM200 Datasheet Descriptions of functional PINs PIN NO. 1 2 3 PIN NAME GND TYPE DESCRIPTIONS POWER GROUND NRESET I P4_3 IO 4 P4_2 IO 5 P4_1 IO 6 P4_0 IO 7 P0_6 IO 8 P0_5 IO 9 VDDIO POWER 10 11 GND POWER P0_4 IO 12 P0_3/Power on trap IO 13 P0_2 IO 14 P0_1 IO 15 P0_0 IO 16 P1_0/SWDIO IO Hardware reset pin; low active General purpose IO; 8mA driving capability. With wakeup function. With internal strong/weak pull‐up and pull‐down.
BM200 Datasheet 17 P1_1/SWDCLK IO 18 19 20 21 GND POWER With internal strong/weak pull-up and pull-down. SWDIO (default). General purpose IO; 8mA driving capability. With wakeup function. With internal strong/weak pull‐up and pull‐down. SWDCLK (default). GROUND VDD POWER Supply 1.8V~3.
BM200 Datasheet Radio Characteristics Condition: VDD=3V, VDDIO=3V, ambient temperature=25℃ Parameter Frequency Range Sensitivity PER≦30.8% (LE2M/LE1M/LR2/LR8) Maximum Input level Maximum Output Power Minimum 2402 ‐93/‐96/‐99/‐104 Typical ‐ ‐ Maximum 2480 ‐ Units MHz dBm ‐ ‐ ‐1 7 dBm dBm Min 2 ‐ 2.97 0 Typical 3.3 0 ‐ ‐ Max 3.6 0.9 3.3 0.33 Digital IO Pin DC Characteristics Parameter Input high voltage (V) Input low voltage(V) Output hi voltage(V) Output lo voltage(V) Condition VDDIO=3.
BM200 Datasheet Antenna 2D Radiation Pattern Results Whayu Industrial Co., Ltd. http://www.whayu.
BM200 Datasheet Mechanical Dimensions Layout Footprint Whayu Industrial Co., Ltd. http://www.whayu.
BM200 Datasheet Application Schematic Layout Guideline Whayu Industrial Co., Ltd. http://www.whayu.
BM200 Datasheet Whayu Industrial Co., Ltd. http://www.whayu.
BM200 Datasheet Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
BM200 Datasheet This module is intended for OEM integrator. This module is only FCC authorized for the specific rule parts listed on the grant, and that the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. The final host product still requires Part 15 Subpart B compliance testing with the modular transmitter installed.