INCLUDED PARTS 1) YN1 Module – (1) 2) Remote Control Unit – (1) 3) Product Information Guide – (1) Note: Can only be used with Fieldnet™ WiFi Technology capable cameras.
HOW DOES FIELDNET™ WORK? PAGE 3
DETERMINE CAMERA MODEL YOU ARE INSTALLING ONTO YOU MUST DETERMINE THE MODEL YOU ARE INSTALLING THE YN1 UNIT ON, AS INSTALLATION INSTRUCTIONS ARE DIFFERENT FOR DIFFERENT MODELS. MAKE SURE YOUR CAMERA IS POWERED OFF BEFORE INSTALLING YN1 UNIT. IF YOU ARE INSTALLING THE YN1 WIFI MODULE ONTO THE X10 OR X10E CAMERA, OR ANY VARIATION THEREIN, PLEASE CONTINUE TO NEXT PAGE IF YOU ARE INSTALLING THE YN1 WIFI MODULE ONTO THE D10 OR IR10 CAMERA, , OR ANY VARIATIONS THEREIN, PLEASE SKIP TO PAGE 6.
INSTALLATION ONTO X10 CAMERA 1 Unscrew and remove USB port protective cap from top of camera. (Illustration A) (Illustration A) 2 With the YN1 Wifi Module facing forward (mounting tab to back), as illustrated below, securely place onto the top of the camera so that the USB prong fits snugly into the USB insert. (Illustration B) Note: Do not force the USB plug into port. (Illustration B) 3 Securely mount the YN1 module to camera by tightening the stabilizer screws on either side of the YN1 module.
INSTALLATION ONTO D10 & IR10 CAMERAs 1 Unscrew and remove cap from top of camera and store the cap on the inside of the camera in the provided space. (Illustrations D&E) (Illustration D) (Illustration C) Loc k Note: If you unstall the YN1 module, you must replace the USB port protective cap, or damage to the camera will occur. This damage will not be covered by warranty.
2 With the YN1 Wifi Module facing backwards, as illustrated below, place it onto the top of the camera so that the USB prong fits into the USB insert. (Illustration F) Note: Do not force the USB plug into port. 3 Screw the stabilizer screws on either side of the YN1 module into the camera. (Illustration G) (Illustration G) (Illustration F) Note: If you unstall the YN1 module, you must replace the USB port protective cap, or damage to the camera will occur. This damage will not be covered by warranty.
WINDOWS WIFI CONNECT 1 Click on the Connect to a Network icon in the notification area on the bottom right-hand corner of the screen. (Illustration H) Illustration is of Windows 7 default screen. (Illustration I) (Illustration H) 2 In the window that appears, you can now see the YN1 equipped camera. Here it is named “RTX_100.” Click on the name to connect to the YN1 module.
MAC OSX WIFI CONNECT 1 Click on the “AirPort” icon on the top right-hand corner of the screen. (Illustration J) Illustration is of Windows 7 default screen. (Illustration K) (Illustration J) 2 In the window that appears, you can now see the YN1 equipped camera. Here it is named “RTX_100.” Click on the name to connect to the YN1 module.
NEXT STEPS Go to www.wildgameinnovations.com to download the interface and information on how to use your computer with your YN1 equipped camera. If using an iPhone or android phone with YN1, you must go to either iTunes or The Android Market to download the Fieldnet app. If you have trouble locating the app, please visit www. wildgameinnovations.com and go to the download section for more information. IMPORTANT NOTES Note: Can only be used with Fieldnet™ WiFi Technology capable cameras.
DISCLAIMERS WGI Innovations, LTD is not responsible for damage, expense or injury caused by the unauthorized use of, alterations to, improper connection of and abuse or neglect of the Wildgame Innovations™ YN1 WiFi Module. WARRANTY You must register your product warranty on line at www.wildgameinnovations.com. Follow the onscreen directions to complete the process.
FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
PAGE 13
WGI Innovations, LTD 602 Fountain Parkway, Grand Prairie, Texas 75050 Telephone: (800) 847-8269 Fax: (972) 352-6633 www.wildgameinnovations.com “Wildgame Innovations” and the “Button Logo are TM trademarks of Wildgame Innovations, LLC. “FIELDNET” is a TM trademark of WGI Innovations, LTD. “Sport Responsible” is a TM trademark of WGI Innovations, LTD.