HD GAME CALL User’s Manual Model # FLX500
INCLUDED PARTS 1) Dog soldier FLX500 electronic game call unit with remote – (2 pieces) HD GAME CALL 2) Product Information Guide – (1) 3) Shoulder Strap - (1) User’s Manual PAGE 1 Model # FLX500
INSTALLING BATTERIES IN UNIT 1 Turn the call on it’s side and rotate battery door to the left. You will hear and feel a click. 3 To close put battery chamber back inside cavity while aligning the arrows and rotate to the right till you can’t turn it any further. 2 Next, pull out the battery chamber, confirm that the positive (+) and negative (-) terminals are oriented correctly and insert ten (10) AA batteries.
INSTALLING BATTERIES IN REMOTE 1 To install three (3) AA batteries for the remote, slide the cover down to open. 2 Next, confirm that the positive (+) and negative (-) terminals are oriented correctly and insert the batteries. PAGE 3 3 To close, slide the cover up.
TURNING SPEAKER UNIT ON Press and hold the power button until LCD is illuminated and then release. Unit is now on. Note: The LCD will enter sleep mode in approximately 1 minute of inactivity. The Speaker unit will auto turn off after 30 minutes of inactivity. CHOOSING PRELOADED INDIVIDUAL CALLS ON SPEAKER UNIT 1 First, press the play/enter button while CALLS is on display. + MENU BACK VOL - 2 Next, press either the up or down button to choose Preloaded.
CHOOSING DOWNLOADED INDIVIDUAL CALLS ON SPEAKER UNIT 1 First, press the play/enter button while CALLS is on display. CHOOSING SD CARD 1 First, insert SD card. + MENU BACK VOL LIN E- - IN SD 2 Next, press either the up or down button to choose Downloaded. Press the play/enter button when the desired option is highlighted. 2 Next, press the play/enter button while SD CARD is on display. NOTE: This option will only show up if an SD card was inserted.
SETTINGS VOLUME CONTROL To adjust volume, press the volume + or -- buttons. + MENU BACK 1 First, press the play/enter button while SETTING is on display. + VOL VOL MENU - BACK - 2 Scroll through the options by pressing the up or down button. Press the play/enter button when the desired option is highlighted. + VOL MENU BACK - Sound Settings: You can switch to All, Side Speakers or Center Speakers Display Settings: Backlight timer can be adjusted to 10 sec, 20 sec, 30 sec or Always On.
DOWNLOAD CALLS FROM PC ONTO SPEAKER UNIT 1 LINE-IN First, connect a USB cable from the PC to the Speaker Unit. B US 2 3 4 T OU E- LIN The computer will auto detect it as a mass storage drive. Then, copy your calls into this drive. Unplug and disconnect the USB cable once you copied the calls into the drive. NOTE: MP3 and .WAV file types can be played. PAGE 7 The Flextone Electronic-game calls also support Line-in from external audio player.
TURN SPEAKER UNIT OFF LINE-OUT The Flextone Electronic-game calls also support audio out to external speaker. You must first connect the audio cable from external speaker into the Line-Out port. B US Note: The LCD will enter sleep mode in approximately 1 minute of inactivity. The unit will turn off in 30 minutes of inactivity. T OU E- LIN Press and hold the power button until LCD is illuminated and then release. Unit is now off. NOTE: Line-out function is only available on the Speaker Unit.
CHOOSING PRELOADED CALLS TURNING REMOTE ON Press and hold the power button until LCD is illuminated and then release. Unit is now on. Note: The remote LCD will go into sleep mode in approximately 1 minute of inactivity. It will power off in 30 minutes of inactivity. 1 First, press the play/select button while Preloaded is highlighted.
CHOOSING DOWNLOADED CALLS 3 Scroll through the call list by using the up or down arrow buttons to the desired call, press the play/select button for the call to begin playing. This will activate the audible call. Note: Call will loop repeatedly until call is deactivated. 1 From the main menu, press the down arrow to highlight DOWNLOADED. Then press the PLAY/SELECT button.
SETTING FAV BUTTONS CHOOSING SD CARD CALLS 1 From the main menu, press the down arrow to highlight SD CARD. Then press the PLAY/ SELECT button. 11 FLX500 1 While playing any sound from any location (preloaded, downloaded or sd card) press the FAV1 or FAV2 buttons for 3 seconds to set that sound for the selected FAV button. PRELOADED DOWNLOADED SD CARD SETTINGS VOL PLAY SELECT PRELOADED VOL The Remote control will start to sync the calls with the speaker unit at this time.
SETTINGS: SPEAKER CONTROLS 1 First, use the down button until Settings is highlighted. Then, press the play/select button to enter settings options. 11 FLX500 PRELOADED DOWNLOADED SD CARD SETTINGS VOL PLAY SELECT 3 Use the up or down buttons to select desired option, then press play/select button. SPEAKERS VOL VOL 11 ALL SIDE ONLY CENTER ONLY PLAY SELECT VOL 2 Next, use the down button until Speakers is highlighted. Then, press the play/select button to enter speaker options.
SETTINGS: DISPLAY OPTIONS You can change the display settings to make the remote easier to read based on lighting conditions. 1 First, use the down button until Settings is highlighted. Then, press the play/select button to enter settings options. 2 Next, press the play/select button while display is highlighted. 11 SETTINGS 11 FLX500 PRELOADED DOWNLOADED SD CARD SETTINGS VOL PLAY SELECT VOL PLAY SELECT VOL VOL 3 Scroll to desired display option by using the up and down buttons.
SETTINGS: FAV KEYS OPTIONS 1 First, use the down button until Settings is highlighted. Then, press the play/select button to enter settings options. 11 FLX500 PRELOADED DOWNLOADED SD CARD SETTINGS VOL PLAY SELECT Use the up or down buttons to select desired option, then press play/select button. Next, use the down button until Fav keys is highlighted. Then, press the play/select button to enter Fav keys options.
SETTINGS: PAIRING OPTIONS 1 First, use the down button until Settings is highlighted. Then, press the play/select button to enter settings options. 11 FLX500 PLAY SELECT 2 VOL Next, press the play/select button while Pairing is highlighted. 11 SETTINGS VOL PLAY SELECT PAGE 15 It will tell you “Successful” if the pairing was completed. NOTE: If the screen says Please Wait, it maybe having trouble connecting. PAIRING Pairing...
SETTINGS: RESET SETTINGS OPTION 1 First, use the down button until Settings is highlighted. Then, press the play/select button to enter settings options. 11 FLX500 3 Press play/select button Settings is highlighted. while Factory 11 RESET FACTORY SETTINGS PRELOADED DOWNLOADED SD CARD SETTINGS VOL VOL PLAY SELECT PLAY SELECT VOL VOL 2 Next, press the play/select button while Reset Settings is highlighted. Then, press the play/ select button to enter reset options.
VOLUME CONTROL To adjust volume, press the volume up or down buttons.
REMOTE BUTTONS FAV 1 & FAV 2: Press to play saved favorite sound 1 and 2. Press and hold down for 2-3 seconds to save to Fav button. UP & DOWN ARROWS: VOLUME UP & DOWN: Press to change the volume higher or lower. PLAY/SELECT: FAV1 VOL Press to go back to previous page or to reach main menu. DISPLAY: Press to change the display of the screen (3 options). Continue pressing till you reach desired display. PLAY SELECT Press to select options and/or to play desired calls.
WARRANTY DISCLAIMERS WGI Innovations, LTD. is not responsible for damage, expense or injury caused by the unauthorized use of, alterations to, improper connection of and abuse or neglect of the WGI Innovations™ products. WARRANTY For the warranty to be in effect, you MUST completely fill out and mail the warranty card along with your proof of purchase to WGI Innovations within (14) days after the date of purchase. As an alternative to mail, you may also visit our website and register your product at www.
WARRANTY FCC STATEMENT Product Name: Electronic Game Call Trade Name: Flextone Model# FLX500 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two criteria: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
602 Fountain Parkway Grand Prairie, TX 75050 800.847.8269 “Flextone” is a registered trademark of Wild Game Innovations, LLC. “Sport Responsible” is TM trademarks of WGI Innovations, LTD. “Dog Soldier TV” is a registered trademark of Steve Criner, all rights reserved.