58kHz Wifi StealthPad Deactivator Installation Manual Version: 2022 Oct Manual Part number: WG WF SP-IM (221027C) WG SECURITY PRODUCTS INC. 591 W.
WARRANTY DISCLAIMER WG Security Products Inc. makes no representation or warranty with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. Further, WG Security Products Inc. reserves the right to revise this publication and make changes from time to time in the content hereof without obligation of WG Security Products Inc. to notify any person of such revision or changes.
IC: 29378-WGWFSP58II This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
TABLE OF CONTENTS OVERVIEW ............................................................................................................................... 1 System Description .................................................................................................................... 1 Features ..................................................................................................................................... 1 Specifications.........................................................
Wifi StealthPad Installation Manual OVERVIEW System Description StealthPad is a distance deactivator providing excellent deactivation reliability and high throughput. The StealthPad can be easily installed on the counter top or flush mount. StealthPad deactivates AM labels up to 5 cm (2 in.) above the surface of the pad at a high throughput speed.
Wifi StealthPad Installation Manual Specifications Electrical Primary Input 115/230 10% @60Hz/50Hz (Input) Rated Current 0.3A/5A Transmitter Output 1.6ms Burst Transmitter Current 0.3A Peak (Nominal) Operating Frequency 58kHz Mechanical StealthPad Antenna Height 236mm (9.3”) Width 186mm (7.3”) Depth 64mm (2.5”) Weight 1.5kg (3.3 lbs) Wifi Antenna Length 108mm (4.3”) Width 10mm (0.4”) Weight 15g (0.
Wifi StealthPad Installation Manual PRE-INSTALLATION GUIDE CAD Dimensions StealthPad(All dimensions are in millimeters) 3
Wifi StealthPad Installation Manual Flush Mount Cut Out Suggestion 4
Wifi StealthPad Installation Manual Installation Site Power Supply Check IT IS RECOMMENDED THAT ALL STEALTHPADS BE ON THE SAME POWER PHASE. Otherwise you need to adjust B sync value step by step to find a best position to sync different StealthPads when connected to power sources with difference phases. ENSURE THERE IS SUFFICIENT CURRENT SUPPLY IF MULTIPLE STEALTHPADS SHARE ONE POWER SOURCE. The rated current for StealthPad is 0.
Wifi StealthPad Installation Manual INSTALLATION Parts List Antenna (1) Wifi Antenna (1) Part Name Order Number Wifi StealthPad for 110VAC power voltage WG WF SP 58-II 110V WG WF SP 58-II 110V B Wifi StealthPad for 220VAC power voltage WG WF SP 58-II 220V WG WF SP 58-II 220V B Wifi Antenna Wifi SMA Antenna 6
Wifi StealthPad Installation Manual StealthPad FRONT VIEW DEFAULT RESET Wifi Antenna Socket Power Socket 7 Power Switch
Wifi StealthPad Installation Manual Deactivator Components and Connections As shown in Figure 1, the deactivator consists of a detect/deactivator antenna pad, power and control box. The cables used and connections are shown in the following diagram. The antenna pad can be installed flush to the counter. Wifi StealthPad Always match the antenna type (read the label on the plastic housing) with control box input voltage type before connecting them; make sure they are matched.
Wifi StealthPad Installation Manual Power Cord Notices North American Power Supply Cords This equipment is supplied with an external power line at one end and a molded receptacle terminal block at the other end. Conductors are color coded white (neutral), black (line) and green or green/yellow (ground). Operation of this equipment at voltages exceeding 130vac will require power supply cords that comply with NEMA configurations.
Wifi StealthPad Installation Manual Fuse replacement Wifi StealthPad Fuse replacement Extend fuse (time-delay fuse) 5mmx20mm 0.5A/5A Equipment must be electrically disconnected from the branch-circuit supply when replacing the fuse. WARNING – TO REDUCE THE RISK OF DAMAGE, REPLACE ONLY WITH SAME TYPE AND RATING OF FUSE.
Wifi StealthPad Installation Manual QUICK START INSTRUCTIONS General Setup and Use Make sure the connectors are firmly attached to the sockets. When all connections are ready, connect power and toggle the power switch. The power LED will come on to indicate the unit is active. Horizontal B Orientation Vertical Orientation Horizontal A Orientation Detection Range (Adjustable) Deactivation Range DR Labels Vertical ............. 9cm (3.5 in) Horizontal A ..... 5cm (2.0 in) Horizontal B ..... 5cm (2.
Wifi StealthPad Installation Manual WGcloud DigiToolClient Communication Connection Setting Instruction Factory settings of the WIFI Module are Sta mode. Set the wireless router to AP’s SSDI: wgcloud Pass Phrase: 4487uh9y Server IP: 54.183.61.
Wifi StealthPad Installation Manual All WG WF SP are under the checker list.
Wifi StealthPad Installation Manual Enter into debug interface 14