TM 58KHz WiFi Floor Guard & Door Guard EAS Systems (EAS5.0 ver1.6 AM board) Installation Manual March 2015 Manual Ver.
WARRANTY DISCLAIMER WG Security Products Inc. makes no representation or warranty with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. Further, WG Security Products Inc. reserves the right to revise this publication and make changes from time to time in the content hereof without obligation of WG Security Products Inc. to notify any person of such revision or changes.
TABLE OF CONTENTS OVERVIEW ..................................................................................................................... 1 System Overview ......................................................................................................... 1 System Configurations................................................................................................. 2 Product Codes and Descriptions .................................................................................
(THIS PAGE INTENTIONALLY LEFT BLANK)
WiFi Floor Guard & Door Guard EAS Systems OVERVIEW System Overview All WIFI EAS Systems utilize a common controller, differing only in the antennas that are used. Pedestal controllers (Ad Guard, Ad Guard XL, Premier Guard and Premier Pro) are imbedded in the pedestal base. Door Guard and Floor Guard controllers are contained in a separate housing. In either case, the controller is comprised of a main circuit board for performing all the functions of transmitting, receiving and alarm notification.
WiFi Floor Guard & Door Guard EAS Systems System Configurations Each WiFi system is powered by its own dedicated SPS. The SPS not only provides 24vac power to the transceiver pedestal, but it includes some very important features.
WiFi Floor Guard & Door Guard EAS Systems Product Codes and Descriptions Systems Product Code Description Comment WG WFFG Floor Guard WiFi Transceiver, 6-foot Includes antennas, WiFi Control Box and Adaptor Box. WG WFDG Door Guard WiFi Transceiver, Gray Includes antenna, WiFi Control Box and Adaptor Box. WG WFDG-B Door Guard WiFi Transceiver, Black Includes antenna, WiFi Control Box and Adaptor Box.
WiFi Floor Guard & Door Guard EAS Systems Specifications Smart Power Supply (WG SPS-24) Electrical 100vac 10 % Primary Input (Stepdown Transformer) 110vac 10 % 120vac 10 % 220vac 10 % 240vac 10 % Secondary Output 26Vac 5 % Rated Output Current 1.8A Maximum Secondary Output Current 1.9 A Built-in Fuse (self-resettable) 500mA Smart Power Supply (WG SPS-24) Mechanical Height 80mm ( 3.15” ) Width 110mm ( 4.33” ) Thickness 140mm ( 5.5” ) Weight 3 Kg ( 6.
WiFi Floor Guard & Door Guard EAS Systems CONTROLLER CIRCUIT BOARD WiFi Main Board Connectors WiFi Module TX Connector RX Connector Alarm Connector 5
WiFi Floor Guard & Door Guard EAS Systems System Configuration Transmit and receive antennas are connected to the WiFi Control Box through the Adapter Box. The following diagram illustrates the connections.
WiFi Floor Guard & Door Guard EAS Systems PRE-INSTALLATION INFORMATION Quick Start for System Connections A Floor Guard system consists of a smart power supply (WG SPS-24), WiFi Control Unit, Floor Antenna and Adapter box. A Door Guard system consists of a smart power supply (WG SPS-24), WiFi Control Unit, Door Guard and Adaptor Box. Connection between the various modules is identical.
WiFi Floor Guard & Door Guard EAS Systems WIFI Control Unit and Adapter box and antenna Connection J1 J3 J2 J2 J6 J6-1 J5 J5-1 J7 J7-1 J4 J4-1 J3 J5 P1 P2 P3 White P1 Red P4 White P2 Green P3 Red P4 Green J1 J5-1 P1 Red P2 Brown P3 P1 White P4 8 P2 Green P3 Blue P4 Orange
WiFi Floor Guard & Door Guard EAS Systems SW5 J3 port of Adapter Box connects to the Transmit antenna (2 white wires). J1 port of the Adaptor Box connects to the figure “O” antenna. J2 port of the Adaptor Box connects to the figure “8” antenna. At this time there is no connection required for figure “8”; only figure “O”. J5 port of the Adaptor Box connects the RX antenna to Adapter PCB (2pcs 2-core wires). J5-1 port of the Adaptor Box is the output port for RX antenna.
WiFi Floor Guard & Door Guard EAS Systems TX ampere debug TX “8” debug jumper TX “O” debug jumper Connect transmit detector to J1, turn on the power supply of CB and transmit detector, adjust TX “O” debug jumper, from the bottom the up. System will be under optimum working status when the transmit detector shows a value from 17 to 22.
WiFi Floor Guard & Door Guard EAS Systems Antenna Installation Instructions: The antenna is designed to be buried in the flooring, in a rectangular of sufficient size to conveniently fit the antenna size. Coverage may be standard flooring (concrete or wood material). There is a cable extending out of the antenna case. Ensure the connector end is extended far enough for service access. Distance from the Antenna Box to the antenna should be no more than 25 feet.
WiFi Floor Guard & Door Guard EAS Systems SMART POWER SUPPLY (WG SPS-24) Controls and Connections SPS Front View SPS Power On/Off Switch Fuse Replacement: Internal AC fuse rating (T3.15AL, 250V) Caution! Remove power before service.
WiFi Floor Guard & Door Guard EAS Systems Terminals Description SPS Main AC Input Terminal Layout Main AC Cable (3 wires) Pin Function Color 1 Neutral Blue 2 Ground Green w/Yellow Stripe 3 Live Red(Brown) N - GND - L Pin: 2 1 3 Main AC Input Terminal LED Status Pin: 1 2 3 4 5 6 7 8 9 LED On Off TX Off TX is Off TX is On System Alarm Alarm Enabled Alarm Disabled Jammer Detection Detection Enabled Detection Disabled Alarm Volume Dim Means Weaker Bright Means Louder 10 SPS Outp
WiFi Floor Guard & Door Guard EAS Systems Main AC Input and Voltage Setup The Smart Power Supply (WG SPS-24) accepts 5 input voltages: 100vac 110vac and 120vac in North America and Japan, 220vac and 240vac in Europe and Australia. Caution: Set the two Voltage Switches (A and B) on the power supply at the specified combination based on the local incoming voltage value (see picture below).
WiFi Floor Guard & Door Guard EAS Systems External Relay interface The external relay interface is located at Output side of the SPS. Suggested Relay Ratings 1A@ 24 VDC Last 4 pins on this end. Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 Pin 9 Pin 10 Power Supply Output Terminal Layout (10 pins) Alarm Relay SPS to Pedestal Cable (6 wires) Pin # 1 2 3 4 5 6 Function GND 24VAC TX OFF Alarm AntiJammer Alarm Volume 7 Jammer Relay 8 1A Contact Rating Electrical Notes: 1.