Assembly Instructions

ManualsBrandsWFX Utility ManualsGarage & Tool StorageFrida Archival Shelving Unit

With the assistance of a helper, set the unit upright.

Attach the D Center Support Beams to the rivets on

the inside and

center of the

front and back

(long) shelf

beams. Double-

check that all

of the shelf

supports are

level and secure.

Archival Shelving

ASSEMBLY INSTRUCTIONS

Sort and count your parts!

ASSEMBLED UNIT

Particleboard Shelves

(Packaged separately)

LETTER

CODE

DESCRIPTION QTY.

PARTS LIST

Position two A Posts side-by-side with the long

flanges forming the sides. Insert the rivets on four of

the B Shelf Beams to the slots on these two posts.

Attach the ends at the same level on each post.

Connect the rivets of eight C Shelf Tie Beams to

both post sides at the same level as the shelf beams,

keeping the long flanges toward the outside.

Assemble the two remaining posts to the four

remaining long shelf beams (referring to step 1). Turn

the post and beam assembly over so the short sides

of the post flanges form the front of the unit. Attach

this assembly to the short shelf tie beams. Attach

each shelf tie beam at the same level as the other

beams on each post.

Place one E Particleboard Shelf (packaged sepa-

rately) on each of the four shelf sections.

PACKAGED

SEPARATELY

Place unit on a level surface. This unit should be securely anchored to a wall or floor with

suitable fasteners, which are not included. Do not use this product for anything other than

the manufacturers intended purpose. Do not stand on any part of the unit, or use it as a

ladder. Do not overload. Distribute weight evenly on each level. Keep heavier loads near

the bottom. Use care when working with metal parts.

All rivets must

connect to the

interior walls

of the posts.

Long Flanges to

form sides

Shelf Beams

and Tie Beams

Support

Beam

Rivets

Post 4

Shelf Beam (Front & Back) 8

Shelf Tie Beam (Sides) 8

Support Beam (Center) 4

Summary of content (2 pages)

PAGE 1
Archival Shelving ASSEMBLY INSTRUCTIONS Sort and count your parts! PARTS LIST LETTER CODE A Q B Q C Q D Q E Q DESCRIPTION QTY. Post Shelf Beam (Front & Back) Shelf Tie Beam (Sides) Support Beam (Center) 4 8 8 4 Particleboard Shelves (Packaged separately) 4 E PACKAGED Q SEPARATELY B Q A Q C Q D Q ASSEMBLED UNIT Long Flanges to form sides Shelf Beams and Tie Beams Support Beam Place unit on a level surface.
PAGE 2
Étagères pour le stockage d’archive INSTRUCTIONS DE MONTAGE Trier et compter les pièces ! LISTE DES PIÈCES CODE ALPHABÉTIQUE A Q B Q C Q D Q E Q DESCRIPTION Poteau Poutre de l’étagère (de devant & en arrière) Longrine de l’étagère (côtés) Support pour le centre de l’étagère 4 8 8 4 Étagères de particule - planche (a emballé séparément) 4 PACKAGED SEPARATELY ASSEMBLED UNIT 1 = = = Placez l’unité sur une surface égale.