Operator Manual For use with WFCO Deckmount Converter WF-68100 Distributed in the U.S.A. and Canada by Arterra Distribution Warranty Service (877) 294-8997 Fax (574) 294-8698 www.wfcoelectronics.
! CAUTION ! OPERATIONAL FEATURES CAUTION and care must be taken when servicing this equipment. To prevent severe shock or electrocution consult your servicing dealer. No serviceable parts. General Consumer Information Power Factor Correction This feature causes the unit to consume less power, which reduces electric cost or allows more AC devices to be used. Reverse Battery Protection This feature prevents permanent damage to the converter from an incorrect battery connection.
All WFCO power converters are automatic three-stage switching power supplies. The converter senses which mode it needs to be in by checking the RV system voltage. If there is no DC output, first check the reverse polarity fuses on the back of the WF-6800 Series deckmount converter. Then, visually inspect the fuses for any breaks; if none are found, use a continuity tester to check for continuity. Absorption Mode: During this mode, the converter output is in the 13.7 Vdc range.
Before the converter output voltage can be checked, it is necessary to disconnect battery output wires from the battery terminals. Insulate each wire to prevent shorts. Plug the converter into a 120 VAC source. Using a voltmeter, check the converter output voltage. ® ® The WF-6800 Series units are UL-Listed, and cUL-Listed (Canadian). They comply with FCC Class B requirement (see below).
WFCO extends to the original owner a Two-Year Limited Product Warranty. This Warranty is in effect from the date of the original purchase for a period of two (2) years. This Limited Warranty is extended specifically for and is limited to recreational vehicle application and is valid only within the continental United States, Alaska, Hawaii and the provinces of Canada.
