Operator Manual For use with WFCO ULTRA III Deckmount Converter WF-9800 Series (model number located on the cover of the unit) TM Distributed in the U.S.A. and Canada by ARTERRA DISTRIBUTION Sales (574) 294-8997 Warranty Service (877) 294-8997 Fax (574) 294-8698 www.wfcoelectronics.
TM Installation and Servicing of the WFCO WF-9800 Series Power Center General Consumer Information CAUTION This product should be installed by an experienced technician. CAUTION and care must be taken when servicing this equipment. To prevent severe shock or electrocution consult your servicing dealer. No serviceable parts. ! WARNING ! This unit employs components that tend to produce arcs or sparks.
TM TM All WFCO power converters are automatic three-stage switching power supplies. The converter senses which mode it needs to be in by checking the RV system voltage. If the input from shore power is 105 Vac-130 Vac to the receptacle, check the reverse battery protection fuse on the front plate of the WF-9800 deckmount converter. Visually inspect the fuses for any breaks/opens. If the fuses do not appear to be open, use a tester to check for continuity.
TM TM WF-9800 Series Troubleshooting GENERAL COMPLIANCE INFORMATION Before checking the converter output voltage, it is necessary to disconnect the battery cables at the battery. Make sure the converter is plugged into AC source (105-132 Volts). Check the converter output voltage at the battery with a voltmeter.
TM TM EXCLUSIONS and LIMITATIONS The OEM Warranty specifically does not apply to the following: Any WFCO product that has been repaired or altered by any unauthorized person. Any damage caused by misuse, faulty installation, testing, negligence or accident or any WFCO product installed in a commercial vehicle. Any WFCO product whose serial number has been defaced, altered or removed. Any WFCO product whose installation has not been in accordance with the WFCO written instruction.
TM WF-9800 Series Specifications (model number located on the cover of the unit) 13.6 Vdc 13.2 Vdc Over the amperage rating load 0.0 Vdc 5 10 15 20 25 5 984 5 983 30 35 40 45 5 985 50 55 9875 9865 60 65 70 75 80 85 WF-9800 Facts Summary Model No. AC Input Voltage Current (A) (V) WF - 9835 7.4 WF - 9845 9.5 DC Output Ranges Volts (V) SPECIFICATIONS Output Load Curve Model: WF-9835, 9845, 9855, 9865 and 9875 will cause the output to fold back.
TM TM WF-9800 Series Converter Dimensions OEM Installation of the WFCO WF-9800 Series Power Center ! WARNING ! This unit employs components that tend to produce arcs or sparks. To prevent fire or explosion, do not install in compartments containing batteries or flammable materials (LP gas). ! CAUTION ! To prevent fire, do not cover or obstruct ventilation openings. Do not mount in zero-clearance compartment. Overheating may result.