® WS-MC2 WS-MC2 1 Piece Marine Receiver OWNER'S MANUAL PRECISION | INNOVATION | DURABILITY www.wetsounds.
1 THANK YOU FOR PURCHASING WET SOUNDS! Congratulations! Thank You for purchasing the Wet Sounds WS-MC2 1 Piece Marine Receiver! Wet Sounds professional marine audio products represent the ultimate in high performance marine audio. Wet Sounds products are specifically engineered to withstand the rigorous marine environment. Please take a moment to read the instruction manual & connection guide before starting the installation.
ABOUT 2 WS-MC2 is a marine grade 1- piece receiver FEATURES INCLUDE: • AM/FM/Weather Band tuner with RBDS • Bluetooth Streaming, Auxiliary, USB, & Pandora Inputs • Simple & Secure Bluetooth Pairing for Android & IOS (A2DP/AVRCP 1.4) • 2.
3 WS-MC2 BASIC CONTROLS 2 5 3 6 4 7 8 9 10 11 1 1. Main Control Knob (MCK) This allows adjustment of Main Volume, as well as making selections when the SETUP and MENU features are being used. Rotate the MCK to highlight a feature, then depress the MCK to select the highlighted feature. 2. POWER/MUTE Press & hold this button for power on/off. Short press this button to MUTE/UNMUTE the volume of all zones. The MC2 will confirm the volume is muted in the display. 3.
WS-MC2 BASIC CONTROLS 4 CROSSOVER Select to allow adjustment of the Crossovers: FRONT HPF This controls the frequencies which are allowed to pass through the Front outputs – both powered and pre-amp. Choosing 60Hz, 80Hz, or 120Hz means that all frequencies below those will be blocked from passing. Choosing All Pass Filter will allow all frequencies to pass through the front outputs. REAR HPF Same as above, but affects the Rear Outputs.
5 WS-MC2 BASIC CONTROLS TUNER REGION The MC2 is defaulted to receive broadcasts in the USA region, but Russia, Latin America, Asia, Japan, Middle East, Australia & Europe regions are also available through this setting. SOFTWARE Allows access to the software menu of the MC2: VERSION Displays what version of the operating software is currently running on the MC2. Visit www.wetsounds.com/downloads to see the most up to date MC2 operating software.
WS-MC2 BASIC CONTROLS 6 Press MENU while in Radio operation to select between the following features: PRESETS Press PRESET to display what stations are set, then rotate the MCK to highlight a selection, then press the MCK to select that station. ADD PRESETS Allows the manual addition of station presets. BAND Choose from FM1 (6 presets); FM2 (6 Presets); AM (6 Presets); and Weather Band (6 Presets) AUTO STORE Will automatically store Presets into the BAND currently being used.
7 WS-MC1 BASIC CONTROLS BLUETOOTH STREAMING OPERATION Press SRC, then select the symbol to access the Bluetooth streaming input. To connect a Bluetooth compatible device to the MC2, make sure no other devices are paired to the MC2, then be sure to enable BT on the device. Search on the device’s Bluetooth menu for “WETSOUNDSMC2” and connect with it. The MC2 will confirm connection on the display. PLAY/PAUSE (#7) Forward/Reverse Track (#10/#11) will operate when in Bluetooth mode.
WS-MC1 BASIC CONTROLS 8 6. BAND This enables changing the tuner from FM1/FM2/AM/WB modes. 7. PLAY/PAUSE This is active when using the Bluetooth Streaming or Pandora sources. Press once for pause, once again for play. 8. ZONE 2 - Decrease the output sent to the ZONE 2 preamp outputs. 9. ZONE 2 + Increase the output sent to the ZONE 2 preamp outputs. Please note – the main volume control will still override final output of Front, Rear & ZONE 2 outputs. 10.
9 LIMITED WARRANTY What This Warranty Covers This is a “limited” warranty. This warranty covers any defect in materials and workmanship. This warranty only covers the original purchaser and is not transferable. This warranty is also only valid if the original purchase was made from an authorized Wet Sounds TM dealer. How Long Coverage Lasts This warranty extends for 2 years from the date of purchase. It is recommended to REGISTER your warranty online within 45 days of purchase at www.wetsounds.
LIMITED WARRANTY 10 How To Get Service Contact Wet Sounds, Inc. either by phone (877-938-7757) or by email (warranty@wetsounds.com). A service representative will assist you in confirming that the problem you are experiencing is caused by a defective product and if that product is covered under warranty. The service representative will issue you a Return Manufacturer’s Authorization (RMA) and other details to obtain service for your product.
® WET SOUNDS INC. www.wetsounds.com 877-938-7757 10621 S.