wet sounds VENUE SERIES VS-69 PRO VS-8 PRO
CONGRATULATIONS! Thank You for Your Wet Sounds VENUE SERIES Purchase. Wet Sounds professional audio products represent the ultimate in high performance audio. Wet Sounds speakers are specifically engineered to withstand the rigorous outdoor environment. The Wet Sounds VENUE Series were designed to provide amazing output combined with a cutting edge style.
VS-8 PRO SPECS RMS Watts 200 PEAK Watts 400 Frequency Res. 20Hz to 20KHZ Sensitivity 92 db @lwatt/lmeter Impedance 4Ohms Avail. Color Black, White H: 10.17" W: 15" D: 11.
VS-69 PRO SPECS RMS Watts 150 PEAK Watts 300 Frequency Res. 20Hz to 20KHZ Sensitivity 92 db @lwatt/lmeter Impedance 4 Ohms Avail. Color Black, White - H: 8.4" DIMENSIONS - D: l 0.
Step 1 - Carefully remove the side cover panels and rear termination panel from the speaker.
Step 2 - Pre-thread hardware in the speaker positioning locations based on desired mounting orientation shown below.
VS-69 PRO *For VS-69 Pro ensure the passive radiator is oriented correctly depending on application. In an under eave or covered application, the passive radiator should be faced upwards to provide optimal performance. In a landscape application, the passive radiator should be faced downwards. The front badge can be rotated depending on mounting orientation.
Step 3 - Mount bracket and safety strap in desired location and orientation (hardware and safety strap not included) . Once the bracket is securely in place, cradle the speaker into the brackets slots and insert remaining hardware into the locking slots. Adjust tilt angle of the speaker and tighten all bracket hardware. Step 4 - Connect the speaker signal connections from the amplifier to the speaker connections (Red + / Black- ). Terminate the safety cable to the anchor support ring.
Optional Tap Adjustment The default setting of the speaker is optimally adjusted for use with Wet Sounds Venue Series Amplifier (4ohm) . In the instance of using the speakers with a 70v distributed load amplifier, remove 2x Phillips head screws and tap adjustment cover. Adjust the rear tap to the desired wattage that satisfies your system requirements and reinstall the cover.
LIMITED WARRANTY WHAT THIS WARRANTY COVERS This is a "limited" warranty. This warranty covers any defect in materials and workmanship. This warranty only covers the original purchaser and is not transferable. This warranty is also only valid if the original purchase was made from an authorized Wet Sounds TM dealer. HOW LONG COVERAGE LASTS This warranty extends for 2 years from the date of purchase. It is recommended to REGISTER your warranty online within 45 days of purchase at www.wetsounds.
HOW TO GET SERVICE Contact Wet Sounds, Inc. either by phone(877-938-7757) or by email (warranty@wetsounds.com). A service representative will assist you in confirming that the problem you are experiencing is caused by a defective product and if that product is covered under warranty. The service representative will issue you a Return Manufacturer's Authorization (RMA} and other details to obtain service for your product.
s 0 u n d s VENUE SERIES w e t wet i sounds WET SOUNDS INC. www.wetsounds.