User's Guide

a link plus user’s guide
Each a link plus receiver has a Favorites List which remembers your favorite a link plus
transmitters. A green indicator on your a link plus receiver means you’re listening to a favorite,
or searching for one. Your a link plus receiver can also Explore to find new a link plus
transmitters - an amber indicator means you are exploring for transmitters which are not on your
Favorites List. A Cluster is a group of two or more a link plus units that behave as one, similar to a
left and right speaker pair. The Bond Button allows you to select which a link plus you’re
listening to.
Essentials
Other Commands
Bond Button
Lorem ipsum
Lorem ipsum
Command Indicator Meaning
Hold
a few seconds
Lorem ipsum
Lorem ipsum
Lorem ipsum
Add / Delete Manually add or delete the current
transmitting a link plus to / from your Favorites List
-
Lorem ipsum
1 Click
2 Clicks (dim) = Hunting
(bright) = Bonded
to = Added
(dim) = Hunting
(flash) = Next one
(bright) = Bonded
to = Added
(flash) = Deleted
Auto Add a link plus will automatically add the
current Amber transmitter to your Favorites List if you
listen to it for 30 minutes
Green Mode Rotate through your list of favorite a link
plus receivers (Favorites List). When a favorite is found,
the search stops and audio is played from that a link
plus.
Amber Mode Explore for new, unknown a link plus
receivers (which are not already on your Favorites
List).
Bond Button Command Indicator Meaning
3 Clicks Mute Repeat command to Unmute; any other Click
command will first Unmute and then do its function.
4 Clicks Red Mode If you have 2 or more transmitters
on your Favorites List, simply power-on just the one you
want to hear and it plays automatically.
6 Clicks Factory Reset Clear Favorites List. Start Over!
Hold during
power on
Make a Cluster of Receivers:
1.
Power off all transmitters and receivers
2.
Power on the Master receiver while holding
hold down its Bond Button - hold the button
down until the SKAA LED begins to flash Red
3.
With the remaining receivers within 3
meters of the Master receiver, power on the
first one, wait for its SKAA LED to flash Red
and then power on the second one;
continue until all of them are powered on
4.
Once all of the SKAA LEDs stop flashing (turn
solid Red), power off all of the receivers.
(flash) =
(bright) =
(dim) = Hunting
(bright) = Bonded
(flash) = Reset Done
, or = Muted
(slow flash)
Receiver has
entered “Cluster
Up” Mode
The Cluster has
been successfully
created.