INSTRUCTION MANUAL Altura Round 18” Side Table SKU: OP8003 V 1.
NOTICE Do not overtighten bolts. (Insert all bolts before tighten bolts.) • Please do not exceed the weight limitations of this item. • Do not stand on or use any part of this item as a step ladder. • Firmly secure all bolts, screws and nuts before use. • Reconfirm that all bolts, screws, and nuts are secure every 90 days. • Do not use or store this item in the proximity of open flame or flammable/combustible chemicals. • Be aware that some parts are heavy and have sharp edges.
PRODUCT ASSEMBLY - OVERALL VIEW PARTS F 1 Look at following overall view of this chair and learn the exact position of each parts to be assembled. G H J I A B L B K N B B A c C B PRODUCT ASSEMBLY 1 Attach part C Cross feet to 2 pcs of part B Table leg with 2 pcs of part 1 Bolt as picture.
PRODUCT ASSEMBLY 2 Attach part C Cross feet to 2 pcs of part B Table leg with 2 pcs of par t 1 Bolt as picture. B B 1 C 1 3 Place step 1 and step 2 part cross, then attach 4 pcs of part B table leg to part A table top with 4 pcs of part 1 Bolt. . Check and tighten all the bolts and screws again and finish the assembly.