INSTRUCTION MANUAL 24" Tufted Velvet Bar Stool SKU: ID403 V1.
CARE & MAINTENANCE • Be careful when assembly, avoid hurting the paint . • Clean the dust with lukewarm water, mild detergent & soft cloth. • Firmly secure all bolts before use, do not use any part of this item as a step ladder. • Reconfirm that all bolts, screws, and nuts are secure every 90 days. • Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
A D E F B I G H C PRODUCT AS SEMBLY 1 Put chair back on a clean flat surface. Align Hind legs in the seat pad as shown in the diagram. D E Using SHORTER SCREW (4) with Washer (#2, 1). 4 3 80% 2 DO NOT FULLY TIGHTEN. 1 First HAND tighten then tightened using key up-to 60-80% only at this stage.
PRODUCT ASSEMBLY 2 B C Align front legs in the seat pad as shown in the diagram. Using LONGER SCREW (5) with Washer (#2, 1 ). 1 2 5 3 80% DO NOT FULLY TIGHTEN. First HAND tighten then tightened using key up-to 60-80% only at this stage. 5 2 1 3 F H G I Align all footrest in the legs as shown in the diagram.
PRODUCT ASSEMBLY 4 F F F F F F F Using your own screwdriver 100% lock Self-tapping Screw (5) as shown in the diagram 5 Put chair in the upright position and SIT ON THE CHAIR to press downwards on the seat pad. Ensuring that all 4 feet touch the ground and chair is leveled. Proceed to tighten all screws making sure the chair remains level when tightening. Check that all screws are tight on a regular basis to ensure chair remains level and secure.
PRODUCT ASSEMBLY 6 Then close the black fabric cover 7 Page 5 of 5