INSTRUCTION MANUAL Linen Fabric Upholstered Dining Chair SKU: ID303
CARE & MAINTENANCE △ Clean the dust with a soft cloth △ Do not store in extremely wet environment.
PRODUCT ASSEMBLY 1 Put chair back on a clean flat surface. 3 60% B 4 2 1 4 2 1 Place seat pad against chair back as shown in diagram. Secure center holes of the seat pad to chair back by using SHORTER SCREW (4) with Washer (#2, 1 ). A DO NOT FULLY TIGHTEN. First HAND tighten then tightened using key up-to 60-80% only at this stage. 2 3 80% 6 2 1 6 2 1 Secure both corner holes of the seat pad to the chair back by using LONGER SCREWS (6) with washers ( #2, 1). DO NOT FULLY TIGHTEN.
PRODUCT ASSEMBLY 3 3 60% Secure both corner holes of the seat pad to the chair back by using screws MEDIUM SCREWS (5) with washers ( #2,1). 5 2 1 DO NOT FULLY TIGHTEN. First HAND tighten All 4 screws TOGETHER at the same time. C 5 Align front legs in the seat pad as shown in the diagram. 1 2 5 2 Tightened up-to 60-80% using key only at this stage.
PRODUCT ASSEMBLY 5 Close black fabric cover 6 Page 4 of 4
