DT50RF (5127) Integration Manual Company Confidential Version: Date: Status: 1.3 2020-05-06 Approved Author: Owner: Approved by: Michael Aeschbacher Michael Aeschbacher Markus Honegger Doc.-No.: File Name 5127.30.316 DT50RF_Integrator_Manual.
DT50RF (5127) Integration Manual Michael Aeschbacher Version History Version Date Author Status Comments 0.1 2015-11-25 Schwand Draft Initial document 0.2 2015-11-30 Schwand Draft Added FCC ID 1.0 2016-03-24 Aescmic Approved 1.1 2016-06-07 Aescmic Approved IC ID corrected 1.2 2020-04-14 Aescmic Approved IDs updated 1.
DT50RF (5127) Integration Manual Michael Aeschbacher Table of Contents 1 Labeling ........................................................................................................................................................... 4 1.1 The electronic label is accessible .............................................................................................................. 4 2 Module installation instructions ....................................................................................
DT50RF (5127) Integration Manual Michael Aeschbacher 1 Labeling The end product has an electronic label including the following text: • FCC ID 2AEJD-103902-1-DT50 • IC 9301A-1039021DT50 • Model DT50RF_MK2_1 • Region Domain Settings • Grantee information • Technical Contact 1.1 The electronic label is accessible Devices based on factory configuration do show the e-label using a state of the art web browser: • http://192.168.1.20 • https://192.168.1.
DT50RF (5127) Integration Manual Michael Aeschbacher 2 Module installation instructions 2.1 General note The module cannot be tested without a baseboard. Therefore, we have a limited modular approval. The module shall be used always in combination with a Neratec DT50 baseboard. 2.2 Installation DT50RF_MK2_1 module has the dimensions according to Figure 1. Module thickness is 5 mm and with RF connectors 7 mm. The DT50RF_MK2_1 need to be fixed to the end product with four M2.5 screws. 65.95mm 63.05mm 2.
DT50RF (5127) Integration Manual Michael Aeschbacher 3 Regulatory Compliance 3.1 Applicable rules For the module following FCC and ISED rules are applicable. - FCC – Title 47 CFR o 15.107 o 15.109 o 15.205 o 15.207 o 15.209 o 15.407 - RSS – 247 Issue 2 - RSS – Gen Issue 5 3.2 FCC Part 15, Class B This device complies with part 15 of the FCC Rules.
DT50RF (5127) Integration Manual Michael Aeschbacher 3.5 Professional Installation This module is intended for professional installation. 3.6 Antennas Regulatory Approval Conditions for using the module: This device can be used with the following antennas Type Part number Manufacturer Gain Chains Dipole F51-N Tekfun 5GHz: 7.