User's Manual

UltraLine II VDSL– Draft 1
030-300237 Rev. A
8/8/06
030-300237 Rev. A 81 August 2006
User Guide
UltraLine II VDSL Gateway (Model 826010)
15.9.2.2 Enabling WPA-PSK Security
If you selected WPA-PSK from the Wireless Security drop-down menu, the following screen will be displayed.
Enter the appropriate values, and then click Save to save the settings.
NOTE: The WPA key must be 8 to 63 characters or 64 hexadecimal digits in length.
Wireless Security (WPA-PSK)
Wireless Security WPA-PSK has been selected as the wireless security method used.
WPA Shared
Key
This string (8 to 63 characters of 64 hex characters) is the key used for encrypting packets being
sent to and from the Gateway. Hexadecimal characters are 0-9 and A-F (or a-f). The key must
be entered in both the Gateway and the wireless station. Using random characters in your WPA
Shared Key increases the security of your wireless connection.
WPA Group
Rekey Interval
The number of seconds between rekeying the WPA group key. A value of “0” means that
rekeying is disabled. The Shared Key is the initial key and new keys are created and used, based
on that key, at each Rekey Interval.
Data Encryption Factory Default = TKIP
Possible Responses:
TKIP- Selecting this option enables the Temporal Key Integrity Protocol for data encryption.
AES- Selecting this option enables the Advanced Encryption Standard for data encryption.
TKIP/AES- Selecting this option enables the Gateway to accept either TKIP or AES encryption