User's Manual

UltraLine II VDSL– Draft 1
030-300237 Rev. A
8/8/06
030-300237 Rev. A 69 August 2006
User Guide
UltraLine II VDSL Gateway (Model 826010)
15.8.3 QOS
The following screen will be displayed if you select Configuration > WAN > QOS from the menu options. This
screen enables you to configure the QOS services for your Gateway. If you change the settings in this screen, you
must click Save Config to save the settings.
CAUTION: Changing the parameters on this screen could cause severe disruption of your service. It is
recommended that you do not change any settings in this screen unless instructed by your service provider.
QOS
Enable QOS Services Factory Default = Enabled
If Enabled (box is checked) this function will be activated.
If Disabled, this function will be deactivated.
Class of Service This enables you to partition network traffic into multiple priority
levels or classes or service.
Peak Info Rate The maximum allow rate for this priority.
QOS Services Committed Info Rate The committed rate for this priority.
Max Queue Size The number of packets that can be queued for this priority.