User's Manual

UltraLine II VDSL– Draft 1
030-300237 Rev. A
8/8/06
030-300237 Rev. A 63 August 2006
User Guide
UltraLine II VDSL Gateway (Model 826010)
15.8 WAN Configuration
This section explains how to configure your Gateway’s WAN connections.
15.8.1 VDSLATM
The following screen will be displayed if you select Configuration > WAN > WAN Port from the menu options.
This screen allows you to select the VDSL services that you want to use.
CAUTION: Settings on this page are meant for advanced users only. Modifying these settings can cause service
disruptions and is not recommended unless your service provider instructs you to do so.
To configure your VDSL settings, do the following:
1. Click the check box of each modulation service that you want to activate (a check mark will appear in the
box if it is not already checked).
2. Select which capability settings you want activated. If desired, you can activate both.
3. Select the radio button of the phone line you want to use.
4. Click Save to save the settings.
VDSL Settings
Modulations This determines which modulations schemes are attempted as DSL comes up.
To enable a modulation, put a check mark in the box of each modulation you want to
activate.
If the box is clear (unchecked), the setting will not be activated.
Capability Factory Default = Bitswap